Affordable and good quality Stainless steel plier.
There are 4 styles in this range: Flat Nose, Round Nose, Chain Nose, and Diagonal Cutter. All are 115mm long and have the following features:

• Box joints
• Vinyl grips
• Stainless steel construction
• Double leaf springs
• Smooth jaws

Affordable and good quality Stainless steel plier.
There are 4 styles in this range: Flat Nose, Round Nose, Chain Nose, and Diagonal Cutter. All are 115mm long and have the following features:

• Box joints
• Vinyl grips
• Stainless steel construction
• Double leaf springs
• Smooth jaws

Affordable and good quality Stainless steel plier.
There are 4 styles in this range: Flat Nose, Round Nose, Chain Nose, and Diagonal Cutter. All are 115mm long and have the following features:

• Box joints
• Vinyl grips
• Stainless steel construction
• Double leaf springs
• Smooth jaws

Affordable and good quality Stainless steel plier.
There are 4 styles in this range: Flat Nose, Round Nose, Chain Nose, and Diagonal Cutter. All are 115mm long and have the following features:

• Box joints
• Vinyl grips
• Stainless steel construction
• Double leaf springs
• Smooth jaws

This unique handle can reduces hand stress.

Tip width: 1mm - 7mm (tappered)

These hard to find pliers are specially designed for wire wrapping, making loops and earrings and other similar tasks. They have one round jaw, the other is flat and has 3 grooves enabling you to repeat three exact sizes of loops.
The round jaw is smooth with a nice taper and the flat jaw tapers to a fine point so you can see exactly what you are doing.
these are wonderful quality pliers that feel good in your hand and the grooves make it easy to produce consistant loops in your jewellery making.

Kate Wolf has solved the problem of making nice right angle bends in wire by creating what she calls the Groovy Chain Nose Pliers. One side of the jaw is perfectly straight and the groove aligns the wire at a perfect 90° angle every time. Groovy pliers can also be used to bend flat pieces at a nice right angle as well because you will “see” the right angle. Made of stainless steel pliers feature ergo handles with PVC grips dual leaf springs and box joint construction. Length 5-3/4 -145mm-.

Make a perfect measured square loop every time with Acculoop2! Jaws clearly marked with measurements for making loops that range from 2-8mm. Length 6-1/2".

Top jaw has 3 sizes to help create a wide variety of loop sizes. Type B : diameter of the tip : 2mm (good for making medium loop)
Box joint construction with red vinyl handles. 5 inches (12.7cm).

Multi-Step Wire looping plier: Make consistant loops using the 3 barrels
The lower jaw is covered with PVC tubing to prevent scratching or marring the wire
Features stainless steel heads and cushion grips
Barrels measure:
5, 7, & 10mm
13, 16, & 20mm

The perfect tool for holding flat stock during finishing.
Jaws are 1-1/4" long and 5/8" wide at the tips. 6-1/2" long overall with box joint construction.

Double Cylinder Bracelet Pliers have two different sized cylinders which are used to quickly put large radius curves into flat metal stock. Result can easily be resized on mandrel if desired. Perfect for making mens' and womens' bracelets.
Length: 165mm

These duck-bill pliers feature a flat interior surface on both jaws; they are ideal for working with oversized or heavy-gauge jump rings and pieces with larger interior diameters.
The wide jaws can also function as a bending brake, helping you create smooth, even bends in sheet and wire.
A jaw stop allows you to set the opening size of the jaws so you minimize the squeezing needed for each bend you make and repeatably achieve the same pressure and curvature as you shape your metal.
Parallel-action pliers have jaws that remain parallel regardless of the range of motion the pliers themselves are put through.
Their jaws hold the object securely, even under very firm pressure.
Choose parallel-action pliers when you need to hold a workpiece or other object securely while at the same time applying firm pressure to it, or when manipulating wire (you can feed the wire down through the throat and hold it firmly over the entire length of the jaw).

Put a clean, consistent radius curve into flat metal stock with our 3/4" (19mm) and 1-3/8" (35mm) Miland Channel Ring Maker pliers. Can easily be resized on a mandrel. Engraving or designs can be added to flat stock before forming with the worry of marring the metal when forming.

Ideally suited for creating bracelets, this tool can make large curves into flat metal stock without marring engraved or embellished surfaces.

• Ideal for making bracelets quickly & easily
• Creates large radius curves into flat metal stock
• Lap joint construction
• Foam grip handles
• Two cylinder size(diameter)
  • Small: 25.4mm&34.9mm
  • Large: 34.9mm&41.3mm

This plier features non-graduated cylinders which create perfect loops every time! It’s the perfect size for constructing coil ends and connectors to finish necklaces made with leather or other types of cord.
Quality lapjoint construction with double-leaf springs to reduce hand fatigue.

** Grips and packages might vary. **

Wubbers has done it again! Wrap beads and make eyepins perfect every time. Never before has there been a pair of pliers that can do so much, and so easy to learn.The unique jaw shape and size provides for a consistent finish. .

This plier has two types of jaw, Flat and half-round, making it perfect for bending & shaping wire & flat metal.
Features boxjoint construction, a polished steel head, & a double-leaf spring to reduce hand fatigue