Hand Tools for craft and hobbyForming tools & Marking tools
 		Login
ImageName
PO-CM-02-0003
Component from metal (blank plate) / 1set
Component from metal (Plate) for accessories, scrapbooking, or other craft.
    • ID: 13183 SALE 30%
    		 Stock: 1007
    		 ¥
    0
    TO-FORM-00A01
    Multi face combination hammer / 1set
    One set consist of several head (interchangeable)
    • Length : 24.5cm, Head size: 1.5cm
    • Small size, easy to use for jewelry works / wire works
    • Head is interchangeable, depends on your purpose
    • Head included :Iron, brass, nylon, plastic

    ID: 2182

    Back Order OK    		 ¥
    1,944
    TO-FORM-00A02
    Double head (metal and nylon) hammer / 1pc
    This double head (Nylon and metal hammer) Great for metal working. Has a face that measures approximately 20 mm in diameter. The length of the head measures approximately 45 mm. The hammer measures approximately 163 mm long
    ID: 2189 Options
    buy 10=20%
    		 Stock: 7
    		 ¥
    970
    TO-FORM-00A03
    ImpressArt series : Short handle Stamping Hammer / 1pc
    • 1 lb. brass head creates crisp even impressions while prolonging the life of the metal stamp
    • Scaled down ergonomic grip designed for ease of handling & accuracy

    Size:(L)165mm
    ID: 18735 Stock: 9
    		 ¥
    2,580
    TO-FORM-00A04
    ImpressArt series : Marking (stamp) ImpressArt -Texture Stamper hammer / 1set
    This innovative tool creates unique, one of a kind textures using your metal stamps as texture heads. To use, simply insert a ImpressArt 6mm stamp into the head, tighten the handle, and stamp repeatedly. Note the Texture Stamper should not be used when a single, full impression is desired. Includes Sprinkle pattern stamp.
    • Create unique textures using your metal stamps
    • Fits all ImpressArt 6mm stamps
    • Includes Sprinkle design stamp

  • Length: 235mm
    • ID: 18745 Stock: 9
    		 ¥
    2,980
    TO-FORM-00A05
    Nylon Hammer / 1pc

    ID: 2190 Options
    		 Stock: 3
    		 ¥
    1,780
    TO-FORM-00A06
    Nylon Tipped Forming Hammer - with 9 Faces (tru strikes brand) / 1set
    Nylon tipped forming hammer has an all-metal head with changeable nylon faces that will not mar your metal. The set includes nine nylon peg inserts in a variety of shapes that are easily changed and secured by a set-screw. Perfect for raising, planishing and embossing work. Hammer weight 4 oz with two nylon tips attached. Overall length 9.5 inches
    ID: 18738 Stock: 5
    		 ¥
    3,850
    TO-FORM-00A07
    Nylon Tipped Forming Hammer ( Fretz brand ) / 1set
    This Fretz® jeweler’s planishing hammer wields the weight of an all-metal head but with the forgiving, fine touch of a nylon face that won’t mar your metal. Nylon inserts are secured by a set-screw.
    Designed by Bill Fretz, this jeweler's hammer is built for toughness and durability. The handle is made of Padauk wood, known for its strength, stability and beauty, and is oil-finished; it's specially shaped to give you a light touch, and the narrowed neck flexes slightly as you hammer for ultimate comfort. The head is cast from 420-grade stainless steel and tool hardened to 50 HRC for maximum durability and effectiveness.
    ID: 18732 Options

    Back Order OK    		 ¥
    12,830
    TO-FORM-00B01
    Wooden hammer /1pc

    ID: 2183 Options
    buy 10=10%

    Back Order OK    		 ¥
    590
    TO-FORM-00H01
    Rawhide hammer (mallets) / 1pc
    For metalworking, where work must not be marred or injured. Heads made of the finest quality rawhide embedded in shellac, and attached to selected hardwood handles. Made in USA.
    ID: 6524 Options
    		 Stock: 20
    		 ¥
    2,960
    TO-FORM-00R01
    Smithing Chasing hammer / 1pc

    ID: 18737 Options
    		 Stock: 11
    		 ¥
    2,490
    TO-FORM-00R10
    Wubbers : Artisan's Mark Texture Hammers /1pc

  • 21.59cm
    • ID: 18739 Options
    		 Stock: 7
    		 ¥
    2,990
    TO-FORM-00R20
    Wubbers : Artisan's Mark Embossing Hammers /1pc

  • 21.59cm
    • ID: 18740 Options
    		 Stock: 8
    		 ¥
    3,080
    TO-FORM-00S01
    Fretz Jewelers hammer / 1pc
    This Fretz Jeweler's hammer is ideal for precise, intricate metal work, and for creating custom bezels and small vessel forms.
    The handle is made of Padauk, known for its strength, stability and beauty, and is oil-finished. Features wedge and heads of stainless tool steel for hardness and endurance. The handle is specially shaped to give you a light touch and a thin neck flexes slightly as you hammer for ultimate comfort.
  • Length: 240mm
    • ID: 18736 Options

    Back Order OK    		 ¥
    9,800
    TO-FORM-00S02
    Standard Chasing hammer / 1pc
    Chasing hammer, has one large, slightly convex, smooth face for striking chasing tools or planishing metal, and one round end for peening and riveting.
    Forge-tempered and polished steel head.
    ID: 18741 Options

    Back Order OK    		 ¥
    2,000
    TO-FORM-00T01
    Texture hammer /1pc
    You can make your own texture on metal using this texture hammer. Each one is double-sided, with a different design on each side. Simply lay your sheet metal over an anvil or other bench block and strike it sharply. The range of decorative effects is endless. The hammer heads are not hardened, so that as they wear, the more interesting the patterns become. Each hammer is 25cm long
    ID: 2561 Options
    		 Stock: 6
    		 ¥
    2,700
    TO-FORM-00T02
    Interchangeable Hammer 12 Heads /1set
    Ideal for jewelry-making, this tool combines 12 tools into one! It features a head weight that is heavier than the competition’s tool to provide better striking power. Head inserts are held securely in place during use with threaded collars.
    Six smooth heads for flattening metal:
    • Flat in nylon, stainless steel & brass
    • Domed in nylon, stainless steel & brass

    Six textured stainless steel heads:
    • Wide Circles • Thin Circles
    • Dots • Speckles
    • Stripes • Weave

    Designed for use on non-ferrous metals.
    • 12 oz. Interchangable Hammer, 22mm face dia., 3" wide head, 9.5" overall length
    • ID: 2560 Stock: 3
    		 ¥
    6,300
    TO-FORM-02C08
    Steel Metal block / 1pc

    ID: 4460 Options
    		 Stock: 1
    		 ¥
    1,350
    TO-FORM-02C09
    Steel Metal block (anvil) / 1pc
    • Designed specifically for metal stamping
    • Constructed of extra hard carbon steel
    • Polished smooth surface will not mark back side of discs
    • Low profile thickness provides ample support while eliminating unnecessary bulk and weight
    • Includes rubber feet so block can be used on delicate surfaces like kitchen tables

    ID: 4461 Options

    Back Order OK    		 ¥
    734
    TO-FORM-02C10
    ImpressArt Stamping block / 1pc
    • Designed specifically for metal stamping
    • Constructed of extra hard carbon steel
    • Polished smooth surface will not mark back side of discs
    • Low profile thickness provides ample support while eliminating unnecessary bulk and weight
    • Includes rubber feet so block can be used on delicate surfaces like kitchen tables

    ID: 4464 Options
    		 Stock: 9
    		 ¥
    680
    TO-FORM-02E10
    Steel Metal block Double side with Rubber / 1pc
    Try this versatile bench block for all your stamping and dapping needs. 4" x 4" steel block sits inside rubber base. Hard vulcanized rubber is excellent when a softer surface is needed. Flip it over to reveal the hardened steel block for flattening, chasing and stamping.
  • Size:110x110x32mm
    • ID: 4463 Stock: 1
    		 ¥
    4,200
    TO-FORM-03A11
    Metal block ( horn anvil ) #3J (Japan) / 1pc

    ID: 4466 Options

    Back Order OK    		 ¥
    1,880
    TO-FORM-03S10
    Mini Stake Forming Set / 1set
    For forming and raising, this 12pc Mini Stake Forming Set is perfect for small-scale projects. Stakes are made of hardened steel and polished to a mirror finish.
    Set includes:
    • 10 Mini Forming Stakes
    • Wood Stand
    • Stake Vise & Holder

    ID: 18720 Stock: 1
    		 ¥
    45,800
    TO-FORM-03S20
    Double-Ended Forming Stake Set / 1set
    Heavy-duty metal forming stakes allow the user to form both synclastic and anticlastic shapes.
    ID: 18721 Stock: 1
    		 ¥
    33,800
    TO-FORM-04010
    Steel Riveting Block / 1pc
    With this Steel Riveting Block, there is no more guesswork on the length of wire to be cut. Use the holes at the top to pre-cut the perfect length of wire for your projects. The holes in the middle are about 1.8mm deep, thus every cut is just the right amount of wire needed to create "head" on both sides. The dimples on the left side are used for support when riveting in order to hold the shape of the rounded rivet head. The circles on the right side are for riveting eyelets in 3 different sizes without flattening the rounded rims. Dimples on the side of the block are for rivets and on the opposite side are circles for eyelets. Both of these sides are for CURVED surfaces and must be mounted in a vise.
  • Size:65x37x9mm
    • ID: 14774 Stock: 1
    		 ¥
    5,850