Hand Tools for craft and hobbyCutting tools : Heat cutter & Ultra sonic cutter
Login
ImageName
TO-CTH-0011A1
Hot cutter : Stencil film heat cutter / 1pc
This tool has been specially designed for cutting stencil patterns faster and easier from plastic, MYLAR®, and resist materials up to 7 mil thick. Perfect for glass etching, sandblasting, crafts and hobbies. Its short shaft provides good tip control and cutting accuracy making it ideal for cutting intricate as well as larger patterns.
Note: Electric is 110 Volt

** The color and the package may vary. **


ID: 7126 Stock: 0

Booking
¥
2,520
TO-CTH-0011B1
Stencil cutter : GOOT HE-31 / 1 set

ID: 18526 Options
Stock: 8
¥
2,990
TO-CTH-0011B2
Hot cutter : Hot knife Refill ( For Hakko Japan No 515 ) / 1 pc
This is a refill for Hakko Hot Cutter No.515 (Id.18525)

ID: 18524

Back Order OK
¥
500
TO-CTH-0011B3
Hot cutter : Hot knife Refill ( For GOOT brand hot cutter ) / 1 pc
This is a refill for GOOT Hot Cutter (Id.18527)

ID: 18534

Back Order OK
¥
550
TO-CTH-0011D1
Hot cutter : Hakko hot knife set ( Hakko Japan No 515 ) / 1 set
Comes with soldering tip, rosin core solder and soldering iron stand so it can be used as a soldering iron.
For cutting Vinyl Chloride, thin Acrylic, ABS, Polypropylene, Polycarbonate.
Note: Electric is 100 volt

ID: 18525

Back Order OK
¥
1,280
TO-CTH-0011F1
Hot cutter : GOOT hot knife set ( HOT-60R ) / 1 set
Comes with soldering tip, rosin core solder and soldering iron stand so it can be used as a soldering iron.
For cutting Vinyl Chloride, thin Acrylic, ABS, Polypropylene, Polycarbonate.
Note: Electric is 100 volt

ID: 18527 Options


Back Order OK
¥
1,590
TO-CTH-0011H1
Hot cutter : GOOT hot slicer ( HE-110 ) / 1 set
Best for heat slicing of nylon garden nets, fish nets, promotional flags, etc.
The sliced end does not fray.

ID: 18529

Back Order OK
¥
4,300
TO-CTH-0011H4
Hot cutter: GOOT High power soldering iron ( CXR-100 ) / 1 set

ID: 18528 Stock: 1
¥
4,100
TO-CTH-0011H8
Genuine replacement parts for GOOT : HE-100TL / 1pc

ID: 18533 Stock: 1
¥
1,950
TO-CTH-0012H4
Power controller for Hot knife / solder PC-11 / 1pc
  • To control the power (heat) of your heat tools / solder / hot cutter.
  • Capacity 20watt - 200watt (max)
  • Input voltage (see option, we have 2 types)

ID: 15430 Options


Back Order OK
¥
1,990
TO-CTH-0021G1
Heavy Duty Handheld Hot Knife HSG-0 (HSGM) German / 1 unit
Hand operated tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic fabric, such as cords, ropes, bands and belting fabric.
Heat up time of blades 6–8 seconds approx. Heat may be roughly controlled by switching tool on and off.

  • ID: 18541 Options


    Back Order OK
    ¥
    5,900
    TO-CTH-0021G3
    Heavy Duty Handheld Hot Knife HC-60F ( SmartyTool brand ) / 1 unit

    ID: 18543 Options
    Stock: 26
    ¥
    12,000
    TO-CTH-0021S1
    Heavy Duty Hot cutter for Styrofoam / 1 unit

    ID: 18544 Options


    21-30 d
    ¥
    28,000
    TO-CUTM-W48A
    PROXXON tabletop Styrocutter Thermocut 27180 / 1 set

    ID: 18506

    Back Order OK
    ¥
    13,295
    TO-CUTM-W48D
    Styrocutter guide for Proxxon ( Shifting Lands ) /1set

    ID: 18507 Options
    Stock: 0

    Booking
    ¥
    4,900
    TO-CUTM-W48E
    Hot knife cutter pen for Foam / 1pc
    Cut foam (EPS or XPS) easily using this hand held foam cutter.
    The thin round steel blade cuts Styrofoam and white beaded EPS foam cleanly in any direction like magic.

    ID: 18499 Stock: 2
    ¥
    1,980
    TO-CUTM-W48P
    Hot knife cutter pen for Foam / 1pc

    ID: 18548 Options
    Stock: 0

    Booking
    ¥
    1,800
    TO-CUTM-W49A
    Hot Wire Foam Cutter Small / 1pc
  • It cuts Soft Styrofoam while dissolving by heat of Ni-Chrome Wire.
  • The cut surface is smooth and does not need the after-treatment.
  • This product cuts off the Styrofoam thickness is under 25/32 inch. (Depending upon the material is hard to cut difficulty.)
  • The power is off when the finger releases the switch, There is without forgetting switch off.
  • Power by 1 “C” size dry cell battery, not included.

    ID: 18503

    Back Order OK
    ¥
    850
  • TO-CUTM-W49B
    Hot Wire Foam Cutter Medium / 1pc
    It is easy to use, lightweight and portable.
    Use a straight edge as guide for straight cuts.
    Product Description:
    On/Off Trigger Switch
  • Pilot Light Shows When On
  • Battery Operation — Uses 2 “C” Batteries, not included
  • Great tool for hobby, craft or art work
    ID: 18504 Options


    Back Order OK
    ¥
    1,775
  • TO-CUTM-W51A
    Hot Wire Cutter : Bow cutter / 1 unit

    ID: 20671 Options


    Back Order OK
    ¥
    9,800
    TO-CUTT-08001
    Ultrasonic Cutter ZO-40W / 1unit
    Features
    • By the high-speed vibration of 40,000/sec., possible to cut smoothly and to see the nice-looking cut surface
    • Compact design with the holder for the hand piece
    • Application example
    • Cutting the gate of the resin products, burring and cutting pattern of PCB
    • Cutting films, sheets and clothes

    ID: 18520

    10-14 d
    ¥
    39,900
    TO-CUTT-08002
    Ultrasonic Cutter ZO-41 / 1unit
    Features
    • By the high-speed vibration of 40,000/sec., possible to cut smoothly and to see the nice-looking cut surface
    • Compact design with the holder for the hand piece
    • Application example
    • Cutting the gate of the resin products, burring and cutting pattern of PCB
    • Cutting films, sheets and clothes

    ID: 18519

    10-14 d
    ¥
    41,600
    TO-CUTT-08103
    Ultrasonic Cutter USW-334 / 1 unit
    Features
    • By the high-speed vibration of 40,000/sec., possible to cut smoothly and to see the nice-looking cut surface
    • Compact design with the holder for the hand piece
    • Application example
    • Cutting the gate of the resin products, burring and cutting pattern of PCB
    • Cutting films, sheets and clothes

    ID: 18521

    Back Order OK
    ¥
    38,900
    TO-CUTT-08104
    Ultrasonic Engraving knife USW-334ek / 1 unit
    High speed vibration of 40,000/sec ensures smooth cutting with gentle force and sophisticated finish Compact & stylish design (equipped with customized handy carrying case) “One-Touch” switch on to use (no setting adjustments needed) No special training required to operate Surface of cutting material protected from burning and melting Complete with set of engraving blades

    ID: 18515

    Back Order OK
    ¥
    49,800
    TO-CUTT-08107
    Ultrasonic Cutter ZO-80 / 1unit
    Specification click here
    ID: 18516

    10-14 d
    ¥
    107,784