Hand Tools for craft and hobbyDrill & Grinder
Sort by
Drill Guide Set / 1 set
Drill Guide Set is an another handy setup, includes six precision-machined drill guide bushings and an acrylic base to hold the guides perpendicular to the work surface. It's great for a variety of common drilling needs, including knob and pull bores, doweling, specialized hardware mortises, and other situations accuracy is essential.
The base works on flat surfaces and also has V-groove in the bottom for perpendicular drilling in round cylindrical stock. Best of all, the entire kit will set you back less than twenty bucks and works with twist bits in sizes that you probably have on hand already.
The set includes:
  • Drill Guide
  • Center punch
  • Bush drill (5mm, 6mm, 8mm, 10mm)
    Weight: 210 gr

    ID: 18810 Stock: 0
    Back Order OK
  • TO-GRND-002A1
    Grinder, Mr.Meister HP-100 R2 /1set

    ID: 4854 Stock: 0
    3-5 d
    Micro Grinder Zero One
    • Hand piece
      RPM : 0-15.000 rpm
      Torque : 2.0 Ncm.
      Weight :160g
      Size : 27x length 135mm
    • Controller
      Input voltage 100 volt (AC) 10 watt
      Weight 850 grams

    ID: 4856 Stock: 0
    3-5 d
    Micro Grinder router SBH35ST-B / 1pc
    Size112x147x78mm 1140 gram
    ElectricAC100V 50/60Hz
    Speed0 - 35.000 rpm
    Torque3.0 Ncm
    Collet2.35mm & 3mm

  • 15x11.5x8cm
  • ID: 20371 Options
    Stock: 0
    Back Order OK
    Starp30 STP30ST /1set

  • 140(w)×155(D)×90(H)mm
  • ID: 20372 Stock: 0
    10-14 d
    Maxima80 MAX35ST /1set

  • 87(w)×150(D)×158(H)mm
  • ID: 20373 Stock: 0
    10-14 d
    Drill Press LITE (for Mr.Meister Series) / 1set

    ID: 14671 Stock: 0
    3-5 d
    Dremel 200-1/15 Two Speed Rotary Tool Kit / 1set
    The Dremel 200 series rotary tool offers the precision and control required to complete a wide range of projects. Its two speed settings allow you to use the low speed setting for cleaning applications and using brush accessories and the high speed setting for routing, cutting and sanding applications.

    ID: 14646 Stock: 0
    Dremel 3000-N/10 High speed rotary tool / 1set

    ID: 14658 Options
    Stock: 0
    Back Order OK
    Dremel 4000-2/30 High Performance Rotary Tool / 1set
    The Dremel 4000 variable speed rotary tool offers the highest performance and most versatility of all Dremel rotary tools. The increased strength of its motor plus electronic feedback circuitry enables consistent performance at all speed levels. Dremel 4000 can use all existing Dremel accessories and attachments plus high-performance attachments to complete the widest range of projects. A slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position.

    • Dremel 4000 High Performance Rotary Tool
    • Circle Cutter/Straight Edge Guide
    • Sanding/Grinding Guide
    • Storage Case
    • Includes 30 genuine Dremel accessories
    • Quick Start Book

    ID: 14653 Stock: 0
    Dremel 4200-6/40 High Performance Rotary Tool / 1set
    The first ever rotary tool with the Easy Change™ mechanism allowing easy and fast accessory changes without a wrench. Features a variable-speed high-performance motor with electronic feedback circuitry that enables consistent performance at all speeds.

    • EZ Change™ mechanism for easy and quick accessory changes
    • EZ Lock™ and EZ Drum™ systems to complete the wrench-less experience of accessory change
    • Highest Value Rotary Kit with 6 attachments and 40 accessories
    • High-performance motor with variable speed and electronic feedback

    ID: 14654 Stock: 0
    Dremel 7000-PK 6-Volt Pumpkin Carving Kit / 1set
    Create pumpkins that are sure to impress the entire neighborhood! For those looking to carve more advanced pumpkins than the traditional jack o'lantern this Halloween, the Dremel pumpkin carving kit allows fast, easy carving of spectacularly sculpted pumpkins. Using the templates provided (or one of the thousands of pre-made templates available on the market), the pumpkin carving kit makes carving intricate pumpkin designs as easy as tracing a drawing.

    ID: 14647 Stock: 2 ¥
    Dremel 8200-1-28 (12V Max Lithium-ion Cordless) / 1set
    The Dremel 8200 variable-speed cordless rotary tool offers the highest performance and versatility of all Dremel cordless rotary tools. The increased strength of its motor facilitates maximum performance at all speed levels. The ability to use all existing Dremel accessories and attachments let the Dremel 8200 complete the widest range of projects. A slim ergonomic body provides a 360-degree rip zone for control in any position. Powered by 12VMAX Lithium-ion battery technology, the Dremel 8200 has a speed of cut that is 2X times faster than the leading cordless rotary tool.
    • Fastest, strongest performing cordless rotary tool available
    • Can be used with all Dremel accessories and attachments
    • Lithium-ion battery maintains charge up to 2 years while in storage

    ID: 14655 Stock: 0
    10-14 d
    Dremel 220-01 Rotary Tool WorkStation / 1set
    It's a drill press, tool holder and flex shaft holder all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches.
    • Shaper/Router Table
    • Instruction sheet

    Compatible with Dremel Rotary Tool models 100, 200, 275, 285, 300, 395, 398, 400, 3000, 4000, 4200, 8000, 8100, 8200, 8220.

    ID: 14672 Stock: 0
    Dremel 231 Shaper Router table / 1set
    Converts your Dremel tool into a bench mounted tool for precise routing, shaping and sanding. Plastic knobs for easy tool assembly and depth adjustment. Smooth table surface to slide your workpiece easily over the table. Slot, groove, sand and trim edges. 3-way adjustable fence for accurate working result. Worktable 203 x 152 mm. Adjustable, transparent router bit guard enables safe working.
    Compatible with Dremel Rotary Tool models 100, 200, 275, 285, 300, 395, 398, 400, 3000, 4000, 4200, 8200, 8220.

    ID: 14673 Stock: 0
    Dremel 335-01 Plunge Router Attachment / 1set
    Turn your corded Dremel rotary tool into a mini plunge router perfect for forming decorative edges, cutting straight slots or routing freehand.
    • Plunge lock-in handle for fast and easy plunge locking
    • Two depth stops with quick release for rapid adjustment of routing depth
    • Clear base allows greater visibility of the work surface
    • Depth guide includes english and metric markings
    • On board storage for router bits and wrench

    FITS TOOL MODEL: 275, 285, 395, 398; 100, 200, 300 and 400 Series; 3000, 4000, 4200, 8200, 8220

    ID: 14674 Stock: 0
    Dremel Attachment : #225-01 Flex Shaft / 1set
    Product Features
    • Comfort grip handpiece - allows finger tip control to cut, grind, sand, sharpen, polish and more!
    • Integrated shaft lock button on the handpiece allows for easy accessory changes.
    • Quick connect - easily attaches to your DREMEL rotary tool
    • More flexible cable - provides more comfort during use.
    • For use with rotary tool models 4000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800

    ID: 14661 Stock: 4 ¥
    Dremel Attachment : #575 right angle / 1set
    Product Features
    • Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools
    • Coupling system allows you to orient the right angle attachment on your tool in 12 different directions
    • Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation
    • Compact design allows you to get into hand-to-reach places

    ID: 14662 Stock: 0
    Dremel Attachment : #670 Mini Saw Attachment / 1set
    Product Features
    • Mini-saw attachment for rotary tools; clear housing for better visibility
    • Cut quickly and easily through wood up to 1/4 inch thick; straight, perpendicular cuts
    • Clear plastic housing
    • Includes 1 rotary tool attachment; rotary tool not included

    ID: 14663 Stock: 0
    Dremel Attachment : #678-01 Circle Cutter & Straight Edge Guide / 1set
    Product Features
    • Makes circles from 3/4" -12" (1.9-30 cm)
    • Precision stamped steel construction for accuracy and durability.
    • Attaches quickly and easily to Dremel Rotary Tools without needing additional tools
    • Depth adjustment allows easy setting of the correct cutting depth

    ID: 14664 Stock: 0
    Dremel Attachment : #A577 Detailers Grip / 1pc

  • Size: 115×77×35mm
  • ID: 14660 Stock: 0
    Nakanishi optional and spare parts

  • ID: 20386 Stock: 999
    3-5 d
    Metal punch Double hole ( ImpressArt ) / 1pc
    The 2 hole punch creates 1.5mm and 2.4mm holes in discs and findings. The Large 2 Hole punch creates 3mm and 4mm holes wide enough for rivets. Simply screw down the desired punch until it pierces through your work piece leaving a clean crisp hole. Works on most metals up to 3mm thick. Replacement punches available

  • Main Unit Package size: 185x75x15mm
  • ID: 6599 Options
    Stock: 6 ¥
    Metal punch ( Euro tool ) / 1set
    This hole cutter/puncher is great for making cold connections. The punches are heat treated and with the screw action, you can create clean holes in soft metals without deforming the metal. With the unique design, it offers more flexibility, accurate hole placements and depth. In addition, by attaching the adjustable guide plate to the bottom of the punch, you can create multiple pieces with holes at the exact locations on each piece.
    • 3 holes for maximum 22ga thickness plate
    • 4 holes for maximum 18ga thickness plate
      Create holes for wire rivets in 18, 16, 14 and 12 gauge.

  • Main Unit size: 115x22x9mm
  • ID: 6601 Options
    Stock: 5 ¥
    Hole punch plier / 1pc
    This hole punch plier will punch hole through Silver, copper, gold filled as thick as 20ga (0.8mm). Hole (pin) size is approximately 1.25mm
    Ergonomic handles, and pliers are made of thick carbon steel
    Include replaceable pin.
    Made by "Eurotool"

    ID: 9843 Options
    Stock: 13 ¥