Hand Tools for craft and hobbyDrill bits, Milling, Router bits
 		Login
ImageName
TO-1DRL010110
Drill bit : General Twist drill / 1pc
Brand : Nachi (Japan).
ID: 4211 Options

Back Order OK		 ¥
290
TO-1DRL010120
Drill bit : for precious metal ( silver , gold etc ) / 1pc

ID: 22869 Options
 Stock: 0

Booking 		¥
350
TO-1DRL01012W
Drill bit : for Metal and plastic ( Wave brand ) / 1pc
  • Shank : HEX type

ID: 22870 Options

Back Order OK		 ¥
295
TO-1DRL010130
Drill bit : Universal shank 2.4mm (3/32") drill / 1pc
  • Diameter in mm (mili meter)
  • Shank diameter: 3/32inch (2.4mm)

ID: 4212 Options

Back Order OK		 ¥
260
TO-1DRL010310
Drill bit : Diamond twist drill ( SmartyTool brand ) / 1 pack ( 5 pcs )

ID: 22861 Options
 Stock: 6
 ¥
1,680
TO-1DRL010321
Drill bit : Diamond twist drill / 1pc
For stone, glass and plated materials, these diamond twist drills clean out better than regular diamond drills
recommended speed 5000 - 30.000 rpm
Made in Switzerland.
ID: 4213 Options
 Stock: 11
 ¥
950
TO-1DRL01032B
Drill bit : Diamond twist drill ( Busch ) / 1pc

ID: 4219 Options

Back Order OK		 ¥
1,880
TO-1DRL010331
Drill bit : Diamond Core Drill / 1pc
Ideal for reaming beads and for drilling smaller holes in stone, glass, metal and ceramic, this core drill is hollow all the way through the shaft, so it drills faster with less clogging. Nickel-plated with 180-grit industrial diamonds. Shanks vary with head size.
Length:35mm
ID: 14619 Options
 Stock: 11
 ¥
1,500
TO-1DRL010333
Drill bit : Diamond Core drill ( Niigata Seiki ) / 1pc

ID: 22864 Options

3-5 d		 ¥
2,800
TO-1DRL010410
Drill bit : For Pearl drilling / 1pc
  • This is drill special for pearl drilling, The tips are designed to prevent chipping of pearls.
  • They are Double sided ( both ends can be used for drilling )
  • Made from HSS ( high speed steel )
    Note :
    If you need in Tungsten carbide, we can provide by special order :
    0.6 mm - 1.0 mm : 520 yen
    1.1 mm - 1.2 mm : 730 yen
    1.3 mm - 1.8 mm : 860 yen

ID: 4214 Options

Back Order OK		 ¥
250
TO-1DRL010420
Drill Bit for Acrylic

ID: 22865 Options

Back Order OK		 ¥
1,290
TO-2DB000-000
Drill bit set for Metal ( Economy type ) / 1 set
  • Economy but decent quality for craft and light duty use.
  • Made in China

ID: 22901 Options

3-5 d		 ¥
480
TO-2DB000-001
Micro Drill bit set / 1set
  • A: set of 10pc (0.5 - 1.4mm / 0.1mm increment)
  • B: set of 20pc (0.2 - 1.6mm)

ID: 2314 Options
 Stock: 3
 ¥
990
TO-2SB000-001
busch steel bar #1 / 1pc

ID: 7001 Options
buy 2 = 10%

Back Order OK		 ¥
162
TO-2SB000-002
busch steel bar #2 / 1pc

ID: 7252 Options
buy 10=20%

Back Order OK		 ¥
139
TO-2SB000-003
busch steel bar #3 / 1pc

ID: 7253 Options
buy 10=20%

Back Order OK		 ¥
120
TO-2SB000-005
busch steel bar #5 / 1pc

ID: 7254 Options
buy 10=20%

Back Order OK		 ¥
151
TO-2SB000-006
busch steel bar #6 / 1pc

ID: 7255 Options
buy 10=20%

Back Order OK		 ¥
162
TO-2SB000-036
busch steel bar #36 / 1pc

ID: 7256 Options
buy 10=20%

Back Order OK		 ¥
190
TO-2SB000-411
busch steel bar #411 / 1pc
Used to deburr end of wire
Choose diameter at least 0.2 - 0.3mm bigger than your wire. For example to deburr 0.9mm wire use 1.1 or 1.2mm.
ID: 7257 Options
buy 10=20%

Back Order OK		 ¥
324
TO-2SB000-413
busch steel bar #413 / 1pc

ID: 7258 Options

Back Order OK		 ¥
307
TO-2SB000-414
busch steel bar #414 / 1pc

ID: 7259 Options

Back Order OK		 ¥
290
TO-3CB000-001
Ceramic cutter Zirconite for mini router /1pc
Ceramic is said to be hard for the next diamond, using the zirconia as a material Difficult to heat generation compared to a metal bar, less wear of the blade there is a difficult characteristic entangled during cutting of soft material, you can use for a long time.
Because of the lightweight, also by increasing the number of revolutions has become difficult to runout.
ID: 22761 Options

Back Order OK		 ¥
2,750
TO-3CB000-002
Ceramic polishing burs /1pc
It is suitable for polishing of hard alloys and the like, and there are many types of particle sizes and it is made slightly harder than silicon, so firm polishing is possible.
It also reduces rubber dropout than usual and has a long service life.
    • ID: 22762 Options

    Back Order OK    		 ¥
    200
    TO-3FB00-SET5
    Polishing burrs : Felt tip / 1set
    Smooth and refine surfaces by using these felt buffs to polish metal, ceramics and glass. Ideal for smoothing interior surfaces, there are twelve interchangeable pieces for the rotary grinding and polishing tool. Use rotary tool and attachable felt buffs at your own risk and always wear safety glasses. Shank diameters measure 3.2mm.
    Kit includes: 4 flat cylinder felt burrs, 3 cylinder pummel felt burrs, (1) 10mm echelon felt burr, (1) 10mm reversed echelon felt burr, 2 triangle felt burrs and (1) 10mm kettledrum felt burr.
    ID: 7275 Stock: 1
    		 ¥
    1,550