Leather craftLeather craft: Adhesive, Dyes & Finishes
Login
Sort by
ImageName
LC-92CLR-011B
Leather dye color : Eco-Flo Professional Waterstain / 1 bottle
This water-based stain is amazing! You won’t believe the rich colors and how easy it is to apply with uniform results. It’s a blend of natural and synthetic waxes, dye-stuffs and binders with high penetration and dyeing power. This stain will not bleed or rub off. Colors can be mixed to form different hues. It can also be thinned with water to reduce intensity. Use the Professional Series finishes for a final coat. Do not use on suede; for veg-tan leather use only.

  • Size: 250ml(8.5 oz)
  • ID: 15641 Options
    Stock: 68 ¥
    2,480
    LC-92CLR-011C
    Leather dye color : Eco-Flo ALL-IN-ONE Stain & Finish / 1 bottle
    Eco-Flo All-In-One Stain & Finish is color and finish combined in one easy-to-use product. It is a water based, low V.O.C., stain for use on natural veg-tanned tooling leather. Perfect to use when speed is an issue or for beginners or kids groups.

    Do not use on suede.

  • Size : 4 oz
  • ID: 15613 Options
    Stock: 24 ¥
    1,100
    LC-92CLR-031A
    Leather dye color ( Paste ) : Seiwa carving dye /1bottle



  • ID: 10419 Options

    Back Order OK
    ¥
    648
    LC-92CLR-033A
    Leather dye color ( Paste ) : Fiebing Antique finish /1bottle
    Fiebing's Antique Finishes can be used to produce an almost limitless combination of deep, vibrant colors on vegetable tanned leathers. A variety of techniques can be used to bring out carved, stamped and tooled designs as well as highlighting seams, edges of appliques and overlays.

    Imparts a soft, lustrous patina that emphasizes tooling, carving and embossing with a subtle, two-toned effect. Antique Finish is not entirely waterproof and should be protected with an additional wax or resin coating
    Antique Finish can be thinned with Fiebing’s Tan Kote.




  • ID: 10420 Options
    Stock: 9 ¥
    1,015
    LC-92CLR-033B
    Leather dye color : Elle Antique finish /1pc

    Difficulty Level:

  • 80cc


  • ID: 10422 Options

    Back Order OK
    ¥
    720
    LC-92CLR-033C
    Leather dye color : Antique Dye /1pc

  • 100ml


  • ID: 10423 Options

    Back Order OK
    ¥
    770
    LC-92CLR-035A
    Eco-Flo GEL Antiques / 1 bottle
    Eco-Flo Gel Antique is a thick, easy to use water based, low V.O.C., antique for veg-tan tooling leather. Flip top squeeze container makes application a breeze and almost mess free.

  • Size : 8 oz
  • ID: 15614 Options
    Stock: 7 ¥
    1,200
    LC-92CLS-011A
    FENICE Professional edge paint / 125ml

    ID: 10425 Options

    Back Order OK
    ¥
    1,300
    LC-92CLS-012A
    Giardini : Maxmatt Basecoat Dense
    Basecoat must be used as first step ( as primer )
    Its purpose is to create a base with excellent adhesion on the leather item, which also fills all the imperfections of the edge, especially the line in the middle when working on edges made of multiple layer hides.
    It will improve the final quality of the edge and obtain a luxurious and high quality edge.

    ID: 10679 Options
    Stock: 0
    Booking
    ¥
    690
    LC-92CLS-012B
    Giardini : Maxedge Basic Edge Paint / 30 ml
    Giardini Basic Edge Paint is based on the polyurethane polymer MAXEDGE, which is the result of Giardini’s first development in the field of leather edge paint. This edge paint was the first to almost completely abandon acrylic technology, thus becoming the starting point for future developments, in particular as regards the ecological sustainability of edge paints.

    To achieve a high quality leather edge finish the Basic Edge Paint should be applied in conjunction with the Basecoat Dense (id:10679), this combination allows you to achieve the best final quality of the leather edge, especially when working on leather edge of a medium-large width (see the video tutorials about how to use the Basecoat). The paint comes with a standard opacity, but if you want a glossy effect or an extra-matte effect, you can apply topcoat on top of it in order to get the desired finish. The product can be simply applied by hand using a Roller Dye Pen and once dried it can be finished according to the traditional finishing operations such as brushing, sanding or ironing. Shelf-life is much more than other water-based paint, making it the most indicated choice for hobbyist or small leather crafters.



  • ID: 10680 Options
    Stock: 29 ¥
    650
    LC-92CLS-012F
    Giardini : Topcoat / 30 ml

    ID: 10690 Options
    Stock: 0
    Booking
    ¥
    400
    LC-92CLS-012H
    Giardini : MaxCraft Leather Dye / 125 ml



  • ID: 10691 Options
    Stock: 105 ¥
    1,480
    LC-92CLS-012J
    Giardini MaxCrart Leather Dye Option / 125ml

    ID: 10693 Options
    Stock: 17 ¥
    1,280
    LC-92CLS-013A
    Acrylic Urethane Edge Dye & Coat for Leather / 1pc
    • Function: Edge Dye & Coat for Leather
      A penetrating edge finish that is durable and long lasting. Edge dye will dry to a semi-gloss and needs to be applied to edges that have been smoothed down. After it is applied, Edge Dye can be polished, burnished or finished with Resolene.Gives a professional finished look to the backs and edges of your leatherwork projects.
    • Apply with Wool Daubers.
    • Type : Acrylic Urethane Edge

  • size:100cc
  • ID: 15601 Options

    Back Order OK
    ¥
    680
    LC-92CLS-013A
    Fiebing's Side kote /1pc
    • Function: Edge Dye & Coat for Leather
      A penetrating edge finish that is durable and long lasting. Edge dye will dry to a semi-gloss and needs to be applied to edges that have been smoothed down. After it is applied, Edge Dye can be polished, burnished or finished with Resolene.Gives a professional finished look to the backs and edges of your leatherwork projects.
    • Apply with Wool Daubers.

  • 118ml
  • ID: 10682 Options
    Stock: 12 ¥
    1,048
    LC-92CLS-013A
    Fiebing's Tan kote / 1pc
    • Function: Provides a protective, moisture resistant, rich mellow finish. Neutral can be used as a base coat for Fiebing's Antique Finish.
    • May be used over Fiebing's Leather Dye, Antique Finish or on natural leather.

  • 118ml
  • ID: 10499 Options
    Stock: 6 ¥
    907
    LC-92CLS-014A
    Basco cova for Leather / 1pc
    • Function: Edge Dye & Coat for Leather
      Simply remove the outer cap and inner cap (behind the applicator), then reattach and saturate the applicator in edge dye. Ensure your leather is clean and free of treatments or contaminants and run the saturated applicator over the edge of your leatherwork until the desired amount has been applied and leave to dry. For optimum results, gently burnish the lacquer shortly after it has become tack free, yet still pliable.
    • Note : These edge dyes are designed for vegetable tanned leather, basically if you leather can absorb the dye then it should work, but if your leather is sealed and does not absorb the dye then it may peel off over time. It may be possible to roughen the edge of your leather with an sandpaper, exposing the grain or absorbent surface, then applying the edge dye. However, as we cannot guarantee this method will work in all cases, please take precautions to ensure your leatherwork is not damaged and always test this method on a test piece to see if it will yield the results desired, before progressing onto your actual project.

  • size: 80cc
  • ID: 10493 Options

    Back Order OK
    ¥
    1,060
    LC-92CLS-014A
    Seiwa Edge Enamel Finish / 1pc

  • size: 30 gram]


  • ID: 10715 Options

    Back Order OK
    ¥
    490
    LC-92CLS-014F
    Fiebings Edge Dye finish with Applicator / 1 bottle
    Dries in minutes, water resistant. Easy to use sponge applicator makes this a must for all leathercraft projects.

    • All-in-one, quick-drying formula
    • Dye and applicator in one convenient container for easy use
    • A quick and professional way to edge finish your projects
    • Shake well, invert bottle and apply evenly to edge of item
    • Perishable (destroy if frozen)

  • size: 118ml (4 oz)
  • ID: 15634 Options
    Stock: 48 ¥
    1,280
    LC-92CLS-015A
    Edge wax stick / 1pc

  • size:25 gram
  • ID: 494 Options

    Back Order OK
    ¥
    389
    LC-92GUM-01A1
    Edge side finish : Seiwa Tokonole / 1 pc
    water based, odor-free, irritant-free, non-toxic, environmentally friendly
    Simply apply a small amount to the flesh side or edge of your leather, spread evenly then firmly work into the leather with a smooth wooden dowel or piece of scrap, reapply as necessary to leather and leave to dry.
    Excellent for burnishing edges as well.
    The fibres will be compacted and a glossy finish will appear leaving the flesh side of your leather so smooth and attractive it won't even need any lining!
    An excellent tragacanth replacement. No more foul smelling tragacanth preservative, no more skin irritation.
    Note : this is NEW packaging

    ID: 10714 Options
    Stock: 48 ¥
    540
    LC-92GUM-01A5
    Edge side finish : Craft sha Toko pro / 1 pc

    ID: 10716 Options

    Back Order OK
    ¥
    330
    LC-92GUM-01B1
    Tragacanth substitute : Eco Flo Gum Tragacanth / 1pc
    Eco-Flo Gum Tragacanth is a water based, low V.O.C., natural gum based edge slicking and burnishing compound for use on natural or colored veg-tanned leather. Produces a professional looking, smooth, shiny, burnished edge.

    Directions for use: Shake well before each use. For best results, round off edge of leather with an edge beveler prior to application. Apply a thin coat of Gum Tragacanth to beveled edge of leather with a wool dauber, cloth or slightly damp sponge. Rub edge very briskly with an edge slicker, bone folder or piece of canvas. As the Gum Tragacanth dries and heats up due to friction caused by rubbing, treated edge will darken and shine. Repeat until desired burnish is achieved. Use caution when applying Gum Tragacanth on leather that is to be stained, antiqued or dyed, as it may resist or block penetration of some color.

  • Size: 132ml
    MSDS
  • ID: 10713 Stock: 10 ¥
    1,300
    LC-92GUM-01C1
    Craft Sha Tragacanth Substitute Leather burnish gum / 1pc
    • Use this for substitute of Tragacanth for leather burnishing agent.
    • Water based, odor free, irritant free, non toxic environmentally friendly
    How to use:
  • Shake well before use
  • Simply apply a small amount to the flesh side or edge of your leather, spread evenly then firmly work into the leather with a smooth wooden dowel or piece of scrap, reapply as necessary to leather and leave to dry.
  • Excellent for burnishing edges as well.
  • Size: 100ml
  • ID: 15619 Options

    Back Order OK
    ¥
    532
    LC-92GUM-01C2
    Craft Sha Tragacanth Substitute Leather burnish gum (gloss type) / 1pc
    • Use this for substitute of Tragacanth for leather burnishing agent.
    • Water based, odor free, irritant free, non toxic environmentally friendly
    How to use:
  • Shake well before use
  • Simply apply a small amount to the flesh side or edge of your leather, spread evenly then firmly work into the leather with a smooth wooden dowel or piece of scrap, reapply as necessary to leather and leave to dry.
  • Excellent for burnishing edges as well.
    *The fibres will be compacted and a glossy finish will appear leaving the flesh side of your leather so smooth and attractive it won't even need any lining!

  • Size: 80ml
  • ID: 15632
    Back Order OK
    ¥
    378