Wubbers Square Mandrel Pliers are good for a number of uses including making even coils, square jump rings, tubes, square beads, and much more! The large, padded, turquoise handles are extra comfortable and measure 6-1/4" long.
The square jaws are a continuous square mandrel (as opposed to being tapered). In addition, the jaws are two different sizes so that you may create a wide variety of square shaped pieces.
The length of each jaw is 34mm.

Small: The larger jaw measures approximately 5mm square and the smaller is 3mm square.
Medium: The larger jaw measures approximately 8mm square and the smaller is 6mm square.

A favorite among wire-working jewelers, this pair of Wubbers® half-round mandrel pliers creates round loops in two sizes. Versatile, comfortable and practical to use, these pliers feature handles angled to give you a powerful grip. Use these half-round mandrel pliers to make smooth curves and half-round components!

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Jump Ring Closing Pliers have a groove at the tip to hold jump rings for soldering or closing.

• For crimping 2-3mm pipe

• For crimping 3-4mm pipe

New from Xuron® -- a bead crimping plier that precisely crimps/folds 1, 2, and 3 millimeter crimp tubes and includes a chain nose plier for handling delicate beads, micro-crimps and for adding an extra squeeze to your crimps, if desired.
The folding stations are designed to fit three different size crimp tubes (1, 2 & 3 mm) and ensure a secure and attractive result.
As with all Xuron® Pliers, the 4 in 1 Crimper has soft rubber hand grips and a return spring that opens the tool after each squeeze.

• Anticlastic pliers
  Anticlastic pliers are similar to synclastic but produce a curve in opposite ways in two directions (saddle-shaped). Produces a fine, finished product in a fraction of the time without having to use a dapping tool. Total length: 8".
• Synclastic pliers
  Synclastic pliers put a curve toward the same side in all directions. Create a bracelet in minutes, not hours. Also makes rings, bangles and is indispensable in doing jewelry repair. Length 8".