• A rolling razor blade that's perfect for all of your sewing and quilting needs. Sharp enough to cut through more than 6 layers of fabric, making quick work of your strip, block, and pattern cutting. Comfortable ergonomic handle reduces hand and wrist fatigue, and dual-action safety lock allows the blade to lock open for comfort and closed for safety. Blade is made of high quality tungsten carbide tool steel for unparalleled sharpness and superior edge retention. For right- and left-handers.
  
• Blade size 45mm
  Blade only included 1 type ( straight type ), other blade type sold separately.

Gooseneck holder for three kinds of cutting operations. Safe blade sliding mechanism.
Include 3 types of blades (A circular blade, a skip blade, and a wave blade.)

Blade replacement for CARL Heavy Duty Rotary Paper Trimmer.
Only blade replacement.

• DCC-28 Straight
• DCC-29 Perforation
• DCM-310
• DCM-462

Soft cushion handle rotary cutter cuts fabric beautifully with just the right amount of blade exposed, whether held upright or at an angle.
For Right and Left handers.

1 piece. Easy-to-change replacement blade includes a blade holder.

Making your own chenille has never been easier! Simple-to-use, multipurpose Chenille Cutter not only helps you easily make your own chenille fabric but can also cut multiple layers of fabric as well as paper, cardstock, fleece and more! Features: four channel guide sizes, turn dial for 24 new blade edges, ultra-sharp, high quality tungsten carbide tool steel blade, no exposed blade for safety, cut curved or straight lines and no scissors needed. Use replacement blades CHB601

Rotary compass cutter with an 18mm stainless steel rotary blade. Perfect for cutting fabric circles in diameter from 4cm to 22cm. Unique ratchet handle is simple and easy to use and greatly reduces wrist fatigue. Designed for both right- and left-handed use.
Uses : Perfect for making circles in fabric for quiltmaking, applique, etc.
Note: include 2 blades.

Standard-duty circle cutter. Perfect for crafts, model making, photography, scrapbooks, memory books and sign making. Extra blades can be stored in handle. Cuts circles up to 15cm (6") in diameter (around: 4-22cm).

• Refill: XB57

This heavy-duty compass cutter is designed to cut circles from approximately 3" to 12" diameter. Perfect for scribing circles necessary for the installation of recessed lighting, in addition to cutting cardboard, mat board, and thin plywood. This knife uses extra-sharp heavy-duty snap-off blades that allow you to simply snap-off a dull cutting edge and advance the new cutting edge.
Also great for cutting half-moon wind slits in banners and cutting out small sections of carpet. Easy, tool-free blade change for convenience.
Good For: cutting cardboard, drywall, paper, and acetates to heavy rubber gasket material. Also great for cutting wind slits in banners.

Push or pull style, reversible fixed blade foamboard cutter can be used with any suitable straight edge. Cuts 90-degree and 45-degree bevel with an adjustable blade depth of 1/8" (0.32cm), 3/16" (0.47cm), and 3/8" (0.95cm). Includes three extra blades. Uses Logan 492 blade.

• Cut 2-15cm diameter circles.
• Transparent plastic body and sharp NT edge make it easy to use by anyone,young and old alike.
  
• Ideal for hobbies and handicrafts,school and home,work and play.

• Cut 1-14cm diameter circles.

• Cut 1.8-17cm diameter circles. Doesn't leave a needlehole

NT Heavy duty circle cutter with sturdy non-slip circular grip ofz
polycarbonate resin. Circle can range from 1-3/16" ~ 6-5/16" diameter.
Ideal for day projects and installation/repair jobs for drywall, roofing and
flooring on floor sheets, carpet and thin veneer as well as lighter
materials such as wallpaper, cloth, etc.
Hold the center grip firmly down and slowly turn grip in the direction of
the cutting edge. Do not try to cut with just one turn.
This heavy-duty circle cutter includes (2) extra durable double-edged blade,
BC-501.
Convenient built-in compartment to store spare blades.
All NT products are manufactured in Japan.

Extension Bar to be used with NT Heavy Duty C-2500P(Circle cutter)
All NT products are manufactured in Japan.

Designed for cutting gaskets, washers or circles, any size up to and including 300mm outside diameter. Can be used with bit brace or by hand. Replaceable blades made of the best material and workmanship. Highly polished.
Made in Japan

Plastic board such as acrylic plate can be cut into a circle with a diameter of 5 cm to 20 cm.
Since it fixes with a suction cup, there is no hole in the hole.

NT cutter Heavy duty, extra large circle cutter with sturdy aluminum beam and rotating grip leaves only a very small center pin mark. Ideal for cutting floor sheets, carpet and thin veneer, etc. Circle can range from 3-15/16" ~ 39-3/8" diameter. Great carpentry tool. Hold the center grip firmly down and slowly turn grip in the direction of the cutting edge. Do not try to cut with just one turn. By turning the grip several times over the surface, you will have better results. This heavy-duty circle cutter includes (1) extra durable double-edged blade, BC-501 and (1) extra durable single edge blade, BC-400. Professional blades are made of high quality carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention.

• Dia. 10 - 100cm (3.94 - 39.37")
• # of blade included: BC-400P x 1, BC-501P x 1
• Replacement blade: BC-400P, BC-501P
• Cutting Material: Thin veneer, ceiling tile, leather, rubber, acetates, cardboard, thin floor mat, etc.
• Good for DIY projects, construction such as drywall, roofing, flooring, industrial application

NT Heavy-duty, extra large circle cutter with rotary blade makes a great fabric cutting tool. Rotary blade cuts without twisting fabric. Unique fabric circle cutter with sturdy aluminum holder and rotating grip for extra stability leaves no center pin mark. Ideal for crafts and projects that involves cutting felt, denim, lace, soft film, etc. Circle can range from 7-7/8" ~ 39-3/8" diameter. Hold the center grip firmly down and slowly turn rotating grip in the direction of the cutting edge. Do not try to cut with just one turn. By turning the cutter several times over the surface, you will have better results. This large circle cutter includes (2) extra durable rotary blade, BR-28 and (1) rotary blade to cut waves, BW-28. Special rotary blades are made of premium quality chromium and tungsten added to carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention.

• Fabric large circle cutter
• Dia. 20 - 100cm (7.88 - 39.37")
• Rotary blade
• # of blade included: BR-28P x 2,BW-28P x 1 Replacement blade: BR-28P, BW-28P
• Cutting Material: Cloth, felt, denim, lace, leather, thin rubber sheet, etc. Good for quilt making, detail or curved cutting on fabric, etc

Ideal for cutting both circle and oval shapes with 45 degree bevel edge finish on mat boards to customize and frame artwork and photos. Cuts perfect circles from 20 to 36cm in diameter and ovals 17:21 to 38:42cm. Adjustable blade depth can be set on this tool according to the thickness of the material to be cut.

Heavy-duty plastic/laminate cutter designed as a scoring tool for sheet plastics and laminates, allowing for the precise breaking of plastics. Features a ratchet-wheel for secure blade extension and retraction, and unlimited blade positioning. Includes 1 reversable tungsten steel blade inserted PLUS 2 replacement blades in the handle. For right- and left-handed use. Guaranteed Forever.

• Refill : XB13