Mokei : Model making (clay, diorama etc)Modelling : Mold making & Casting material
Login
Sort by
ImageName
MD-1MR-1003E
Slik metal clay conditioner and release (Non-Stick Balm) / 1pc
Slik metal clay conditioner and release works to condition metal clays. It gives clays great texture and works better than water for reducing clay stickiness. An improvement on olive-oil based balms, slik results in a medium with superior texture that remains moist. Slik is easy to work into clays; slik should be applied first to your hands, then spread lightly onto a patty of clay and kneaded in. Slik also works as an all-purpose release on tools or texture surfaces.

  • Size: 2 oz (56gram)
  • ID: 5668 Stock: 2 ¥
    1,690
    MD-1MR-1003F
    Cool Slip Anti-Stick Solution / 1pc
    Spray or brush a small amount of CoolSlip onto most any surface and it will release metal clay cleanly. Use when molding or texturing metal clays for impressions that are crisp, sharp and free from residue. For use on glass, plastic, metal, rubber, paper and polymer clays. To use, mist surface lightly from a distance of 8 inches; a light application of CoolSlip is effective. CoolSlip is non-toxic, non-reactive, non-aerosol, odorless and fast drying.

  • Size: 4 oz bottle (126ml)
  • ID: 5669 Stock: 0
    Booking
    ¥
    1,750
    MD-1MT-0101A1
    Mr.Katadori block - Base Plate / 1set
    • Base size :160×80(mm) x 4
    • Block cap big : H16×W32×T6(mm)×24pc
    • Blcok cap small :H16×W16×T6(mm)×2
    • material : ABS heat resistance up to :70 celcius

    ID: 5371 Stock: 2 ¥
    800
    MD-1MT-0101B1
    Mr.Katadori block 32mm / 1set
    Use this block to make "Wall" when pouring mold material.
    • Size: 32mm
    • Can make mold up to 500gram
    • Qty: 102 pieces

    ID: 5372 Stock: 0
    Back Order OK
    ¥
    540
    MD-1MT-0101B2
    Mr.Katadori block 64mm / 1set
    Use this block to make "Wall" when pouring mold material.
    • Size: 64mm
    • Can make mold up to 1000gram
    • Qty: 108 pieces

    ID: 5373 Stock: 0
    Booking
    ¥
    1,296
    MD-8DVD-011A1
    DVD mold making part 1 : Mold Making and Casting / 1pc
    Mold Making and Casting
    Master mold maker and internationally renown artist Michael Kryger takes beginning mold making step-by-step to show how to create molds and beautiful castings for fun or profit.
    This 60 minute DVD is an introduction to: Silicone Molds, Resin Casting, Mold Boxes, One Piece Molds, Block Molds, Blanket Molds, Venting Sprues, Vacuum Chambers, Demolding, and Finishes.

    ID: 14194 Stock: 1 ¥
    4,500
    MD-8DVD-011B1
    DVD Introduction to Mold Making and Casting / 1pc
    This DVD introduces the viewer to the basics of mold making and casting, including how to select a mold rubber, how to prepare your original model for mold making, and much more.
    DVD. 72 minutes.

    ID: 14197 Stock: 1 ¥
    1,050
    MDSPL-B-BA000
    Smooth ON : Rebound /1set

  • A:450g
    B:450g
  • ID: 16633 Options
    Stock: 0
    Booking
    ¥
    7,390
    TO-TING-018A1
    Padico Clear Silicone Mold Gel / 1set
    Cure in 24 hours at room temperature and make clear silicone mold.
    Size: 100gram (A:50g, B:50g)

    ID: 14740 Stock: 1
    Back Order OK
    ¥
    3,024
    xx
    Mold Builder Liquid Latex Rubber / 1pc
    Castin'Craft Mold Builder is a natural, liquid latex rubber used to make your own molds.
    Create highly detailed, reusable molds.
    Can be used on models made of metal, clay, plaster, wood, plastic or glass.
    Brass or copper should first be coated with an acrylic lacquer or shellac.
    Seal porous materials like clay, plaster and wood with a paste wax.

  • H930x945mm 473ml
  • ID: 16638 Stock: 0
    Booking
    ¥
    2,980
    xx
    Resin injector / 1pc
    You can use Resin injector for a 3D type mold and openwork type mold.

  • Length : 13cm
    Package size: 17.5x8.5cm
  • ID: 16072 Stock: 1 ¥
    780