/
Mokei : Model making (clay, diorama etc) /
Clay : Silver clay (Art clay & PMC)
You can see other clay material by brand / maker
PMC + (Plus) Silver clay / pack
Discover PMC Plus and start working with a more advanced metal clay. This product is 85% fine metal and 15% binder by weight. PMC Plus shrinks 12-15% during firing and consists of smaller metal particles than those in PMC standard, which allows higher metal content and therefore less shrinkage. With PMC Plus, firing times have been shortened dramatically from 2 hours to a minimum of 20 minutes.
Uses |
This form sinters more solidly than the original version and results in a stronger final product. This version can be used to craft any type of item, but we caution it's use for rings since it is not as strong as PMC3. It must be burnished well before soldering and uses surprisingly more solder than sterling silver. |
Workability |
PMC+ dries more quickly than PMC Standard, so care must be taken to quickly remove and save scraps. Unused clay should be kept tightly sealed when not in use. |
Embedded Objects |
Any object that can withstand the firing temperatures and times of PMC+ can be embedded and fired in place. Some natural gemstones, lab gems and cubic zirconia's can be used, as well as porcelain. |
Firing Options |
|
Temperature |
Hold Time |
Kiln |
1650F 1650F 1560F 1470F |
2 hours (optimum) 10 min 20 min 30 min |
Torch |
Red Glow |
5 min |
|
*
This product can be BACK ORDERED
You can buy even though stock is not available (or not enough).
Attention : Usually it takes like 1 weeks until we can get the stock and send to you.