Mold making Oyumaru 300 ( mix color ) / 1set

Make your own molds, using only hot water!
Great Japanese moulding material which is re-usable, so you can keep using it for different mould shapes. Perfect if you need to make lots of moulds but only need to use each to create few copies. Picks up detail surprisingly well.

• Dip a piece of the oyumaru in hot water (approx: 80 degree C) for about 3 to 5 mins. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel.
• While it is still soft, press the material you wish to mold into the Oyumaru. If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.
• Allow Oyumaru to cool down, remove your object and your mold is ready.
• Oyumaru is reusable.
• Material : SBS no hazardous material compound (non PVC), conforms to safety requirements of ASTM D-4263 and EN71

Oyumaru 300

Color :Sky blue, orange, yellow, leaf green, sparkle white, purple, pink

Size :Cerise bag: 120×125×35mm Rubber size: 58×15.5×8mm

Oyumaru Variety Set

Color: Pink, purple, sky blue, marine blue, leaf green, yellow, orange, red, snow white, black

Size: Case size: W145×H200×D9mm Rubber size: W15.5×H58×D8mm