3-step mechanism is fast, portable, very easy to use, and costs hundreds less than comparable oval cutters. Cuts perfect bevel openings without connecting to any other equipment. Cut single, double, or even triple mats. Adjusts from oval to circle cutter with a simple twist of the knob. Cut ovals from 3-1/4" x 4-3/4" (8.25cm x 12cm) to 20"x 23" (51cm x 58cm) and circles from 4-3/4" to 20" (11.5cm x 51cm) diameter. Maximum difference between oval width and oval height is 3" (7.62cm). Includes creative matting instructions and five extra blades. Uses Logan 324 blade.

Rotary compass cutter with an 18mm stainless steel rotary blade. Perfect for cutting fabric circles in diameter from 4cm to 22cm. Unique ratchet handle is simple and easy to use and greatly reduces wrist fatigue. Designed for both right- and left-handed use.
Uses : Perfect for making circles in fabric for quiltmaking, applique, etc.
Note: include 2 blades.

Standard-duty circle cutter. Perfect for crafts, model making, photography, scrapbooks, memory books and sign making. Extra blades can be stored in handle. Cuts circles up to 15cm (6") in diameter (around: 4-22cm).

• Refill: XB57

This heavy-duty compass cutter is designed to cut circles from approximately 3" to 12" diameter. Perfect for scribing circles necessary for the installation of recessed lighting, in addition to cutting cardboard, mat board, and thin plywood. This knife uses extra-sharp heavy-duty snap-off blades that allow you to simply snap-off a dull cutting edge and advance the new cutting edge.
Also great for cutting half-moon wind slits in banners and cutting out small sections of carpet. Easy, tool-free blade change for convenience.
Good For: cutting cardboard, drywall, paper, and acetates to heavy rubber gasket material. Also great for cutting wind slits in banners.

NT Heavy duty circle cutter with sturdy non-slip circular grip ofz
polycarbonate resin. Circle can range from 1-3/16" ~ 6-5/16" diameter.
Ideal for day projects and installation/repair jobs for drywall, roofing and
flooring on floor sheets, carpet and thin veneer as well as lighter
materials such as wallpaper, cloth, etc.
Hold the center grip firmly down and slowly turn grip in the direction of
the cutting edge. Do not try to cut with just one turn.
This heavy-duty circle cutter includes (2) extra durable double-edged blade,
BC-501.
Convenient built-in compartment to store spare blades.
All NT products are manufactured in Japan.

Extension Bar to be used with NT Heavy Duty C-2500P(Circle cutter)
All NT products are manufactured in Japan.

Designed for cutting gaskets, washers or circles, any size up to and including 300mm outside diameter. Can be used with bit brace or by hand. Replaceable blades made of the best material and workmanship. Highly polished.
Made in Japan

NT cutter Heavy duty, extra large circle cutter with sturdy aluminum beam and rotating grip leaves only a very small center pin mark. Ideal for cutting floor sheets, carpet and thin veneer, etc. Circle can range from 3-15/16" ~ 39-3/8" diameter. Great carpentry tool. Hold the center grip firmly down and slowly turn grip in the direction of the cutting edge. Do not try to cut with just one turn. By turning the grip several times over the surface, you will have better results. This heavy-duty circle cutter includes (1) extra durable double-edged blade, BC-501 and (1) extra durable single edge blade, BC-400. Professional blades are made of high quality carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention.

• Dia. 10 - 100cm (3.94 - 39.37")
• # of blade included: BC-400P x 1, BC-501P x 1
• Replacement blade: BC-400P, BC-501P
• Cutting Material: Thin veneer, ceiling tile, leather, rubber, acetates, cardboard, thin floor mat, etc.
• Good for DIY projects, construction such as drywall, roofing, flooring, industrial application

Size : 70x630x85 mm

NT Heavy-duty, extra large circle cutter with rotary blade makes a great fabric cutting tool. Rotary blade cuts without twisting fabric. Unique fabric circle cutter with sturdy aluminum holder and rotating grip for extra stability leaves no center pin mark. Ideal for crafts and projects that involves cutting felt, denim, lace, soft film, etc. Circle can range from 7-7/8" ~ 39-3/8" diameter. Hold the center grip firmly down and slowly turn rotating grip in the direction of the cutting edge. Do not try to cut with just one turn. By turning the cutter several times over the surface, you will have better results. This large circle cutter includes (2) extra durable rotary blade, BR-28 and (1) rotary blade to cut waves, BW-28. Special rotary blades are made of premium quality chromium and tungsten added to carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention.

• Fabric large circle cutter
• Dia. 20 - 100cm (7.88 - 39.37")
• Rotary blade
• # of blade included: BR-28P x 2,BW-28P x 1 Replacement blade: BR-28P, BW-28P
• Cutting Material: Cloth, felt, denim, lace, leather, thin rubber sheet, etc. Good for quilt making, detail or curved cutting on fabric, etc

Size : 75x375x75 mm

Ideal for cutting both circle and oval shapes with 45 degree bevel edge finish on mat boards to customize and frame artwork and photos. Cuts perfect circles from 20 to 36cm in diameter and ovals 17:21 to 38:42cm. Adjustable blade depth can be set on this tool according to the thickness of the material to be cut.

Cut and draw circles up to 15cm(6")
Handle rotates for easy cutting. Designed to work with pens or pencils for drawing circles.
Blade cover locks for safety. Blades can be stored in the handle.
Includes: 1 circle scissor, 1 shuttle blade, 2 replacement blades.

Need to draw an accurate circle?
One where the finishing point actually meets the starting point?
M.POWER's FLTS flat lying trammel head set will guarantee you exactly that.