For 1 - 4 cup
Size: 137x116x102, mouth size 116(mm)
Material : Polypropylene
Include measurement spoon

For 1 - 4 cup
Material : Glass
No.reg: 201020

Include one measure spoon.
No.reg: 201020

No.reg: 101010

Hario V60 Ice-coffee Maker Fretta is a rapid-cooling method ice coffee maker. Because of the size of the ice container, water cools rapidly after dripping. The cone-shaped dripper brings out the coffee’s full flavor.
The Fretta's unique design combines a 02 size dripper cone similar to the Hario VD-02T with a 600ml glass carafe.
Curved ridges on the inside of the cone aid in the control of water flow as it interacts with coffee grounds.
The plastic diffuser allows for quicker cooling and a more balanced flow of coffee over the ice, resulting in less melting.
Size : 130W x 130D x 330H (mm) Volume - 520 ml
No.reg: 101010

The Hario V60 Range Server is made of heatproof glass and was originally designed for the microwave. It is fitted with a lid, surrounded by silicon, and the server with its lid can be placed in a microwave. Lid fits snuggly within the carafe's neck.
Hario filter cones can be placed directly atop the range server, which in turn, provides easy pouring of brewed coffee.
This is some of the highest quality glass being manufactured by Hario Japan
No.reg: 201020

Hario Syphon coffee has a taste of professional support to bring out the flavor of the coffee straight Appropriate equipment has been said, the other is not attractive and dynamic extraction method. In addition, using steam pressure, so you automatically extract coffee, a cup of coffee is delicious and everyone without fail. Alcohol lamp stand design can also be used for commercial gas burner.

Size : +/- 130x120 mm

Use these Treat Bags to wrap homemade or store-bought goodies. Plastic treat bags come with twist ties. Includes 16—4 in. x 9.5 in. (10 cm x 24 cm) treat bags and twist ties. Perfect for party or special events with kids and friends !

Features

• 3 LED lamp with 3 canging colors (Red, Blue, Green), and colorless with three color lights simultaneously.
• Safe and enviromentaly friendly, using Japanese LED light.
• Perfect for birthday, or clay cake making
• Diameter 75mm, height 28mm.
• Using ordinary battery

Size : 100 x 148 mm ( 10 sheets )

** Last Sock **

Use this tool to positions over the pin and then using leverage you wind down the pin until it meets the waher on top of the joint disc. Use a little bit of extra pull to tighten the pin well to ensure a secure fit!
Another tip that is worth mentioning is to make sure that you have no creases between the joint discs as these will loosen the joint once you start moving the arm or leg. I also like to trim away any pile between the discs to ensure a nice snug fit!
Length : 210mm

These wire is used for Practice / learning, in USA usually called "Merlin's gold" because the color looks like gold.
Composition: CDA #230 alloy (85% copper /15% zinc)
Shape: round
Diameter: 0.81mm
Hardness : Dead soft

EPIPHANY CRAFTS-Shape Studio Bubble Caps. Use these bubble caps with an EC Shape Studio tool to create your own custom epoxy shapes! This package contains one 5x3-1/2 inch sheet of bubble caps .Available in a variety of different shapes: each sold separately. Number and size varies by shape. Shape studio not included.

Use this Interchangeable Border Punch Starter Set with our border punch cartridges (sold separately) to add a variety of decorative borders to paper craft projects. Simply add a decorative edge to a project, then switch the punch cartridge to add a different border to your next scrapbook page or handmade card. The starter set punch includes a larger handle to make punching easier. Interchangeable cartridges stack conveniently to save space in your craft room, and their compact design makes taking them to crops easier than ever. Starter set comes with a “Daisy Chain” border punch cartridge, a design that you can weave a ribbon or decorative strip of paper through for a unique effect.

You need Crop-A-Dile III (id: 12766) and the Main Squeeze (id: 12767)
(sold separately)
Related Products

Transform a straightforward design into a stunner by adding an embossed icon or border to your project.
(design size: 1-1/4" x 1-1/4")
For use with the Crop-A-Dile III Main Squeeze Tool, sold separately.

This is a simple and useful base to put your tool's painting and coating.

Create textures on clay (Artclay, PMC clay, polymer clay) by pressing this texture sheets on clay material.
Transparent material allows users to line up designs for a seamless pattern.
size"6"X4"

Create textures on clay (Artclay, PMC clay, polymer clay) by pressing this texture sheets on clay material.
This texture plate is made from high quality heavy duty plastic mold, so... it can be used to make texture (emboss) on paper and thin metal.
Size: 215 x 120mm with 2 sides motif designs.

Create textures on clay (Artclay, PMC clay, polymer clay) by pressing this texture sheets on clay material.
This texture plate is made from high quality heavy duty plastic mold, so... it can be used to make texture (emboss) on paper and thin metal.
Size: 125 x 125mm with 2 sides motif designs.