Search results Login
ImageName
PO-PLAS-A1001
Ecozai A1 : Water based Acrylic composite
EcoZai A1 is a 2 part composite , consisting of a natural mineral material and a water based Acrylic resin, when mixed together will produce a very strong composition, which harden within approx 1 hour and become hard and strong, smooth and very detail surface, and weather proof (suitable for exterior application).

  • ] ]
  • ID: 16710 Options
    Stock: 54
    ¥
    1,500
    PO-PLAS-A1003
    Ecozai A1 : Additive / 100 gram

    ID: 16711 Options
    Stock: 97
    ¥
    690
    PO-PLAS-A1005
    Ecozai A1 : Exterior Waterproof & UV coating / 1 bottle (250 gr)
    This is a water based coating to protect the product against moisture and to give the product a weather resistant quality. A1 Sealer PLUS is a concentrated solution of acryl polymers in water. Always add 30% water to A1 Sealer PLUS before use. The work surface must be free of wax, oil, dirt and dust. Apply the sealer with a brush, roller, brushing with a soft cloth or with a spray.
    A1 Sealer PLUS can be applied in one or more layers to improve the protective qualities of the layer. A second layer can be applied after 45 minutes, depending on the temperature and humidity. When applying the sealer with a soft cloth, one layer of A1 Sealer PLUS will result in a satin matte gloss. More gloss is achieved by applying several layers. We recommend inspecting the treated surface every year and if necessary re-treat it with A1 Sealer PLUS every 6 years. This creates an expected life span of the A1 object of 50 years. There is a choice of A1 Sealer PLUS Matt and A1 Sealer PLUS Satin. For the most matt result, we recommend applying a layer with the A1 Sealer Satin first and then a layer with A1 Sealer Matt. The advantages are: - one component - free of solvents - water-based - quick drying - easy to apply - good UV-resistance - excellent adhesion - dirt resistant and water resistant

    ID: 16712 Options
    Stock: 17
    ¥
    1,500
    PO-PLAS-A1008
    Ecozai A1 : Mold release
    EcoZai A1 release agent / 1pc
    EcoZai A1 release agent is a petrolatum based wax formulated specifically to release EcoZai A1 casting/laminating products from either plaster or from cured EcoZai A1 itself. It also maybe used as a release agent for rigid polyester molds.
    Application Apply to a plaster or EcoZai A1 Using Foam brush or cloth, apply into the “grain” of the mold. Then, using asecond, clean piece of terry cloth, rub off the wax leaving a thin film.Repeat the above procedure for a second time.
    Please note: DO NOT use to much (too thick), excess can cause“pocketing” of the gel coat and will decrease releaseproperties.

  • Bottle : 50 gram
  • ID: 16714 Stock: 7
    ¥
    980
    PO-PLAS-FB003
    Ecozai : Basalt Fiber for composite laminating
    • Strong Basalt is extremely durable, resistant to craking, resistant to rust, and light.
    • Safety Because of the inert nature of basalt, it is NOT a carcinogen. Also, Ecozai Basalt fiber which we sell, is between 9 and 16 micrometers in diameter, which is too large to be an inhalant risk. Basalt also causes significantly less skin irritation. ( No itchy ).
    Harga adalah per meter lari , lebar 1.2 meter.

    ID: 16717

    Back Order OK
    ¥
    2,500
    PO-PLAS-MX202
    Ecozai Natural Granite sand / 250 gr

    ID: 16700 Options
    Stock: 108
    ¥
    380