Wonderful little tool extends the life of your cutting blades. Hold the sharpening disk in one hand, position the blade directly onto abrasive ring and twist in one direction to remove small burrs and dull spots from the blade. Available in three blade sizes: 28mm, 45mm, 60mm.

A tool for cutting plastic plates.
If the attached plate is set, cutting in horizontal and vertical directions and cutting at any angle can be performed accurately.

Standard blade 0.3mm is set.
It is possible to replace it with an optional spare blade (0.25mm thickness).

EZ-STRIKE Metal working hammer includes a fixed steel head plus interchangable nylon and brass heads (third head stores on handle end). A coated handle helps reduce vibration. Total tool weight: 35 ounces.

A dapping block and punch are used to form soft metals* into a dome shape.
ImpressArt’s Dapping Kit has one curved depression that can easily add a domed effect to stamping blanks up to 1 ¼” in diameter. The depression provides a scratch-free, non-marring surface that produces an even, smooth curvature to pendants and more intricate designs.

Its multi-storage options allow the dapping block and punch to be stored upright on top of a workbench or flat inside a drawer.

To use, simply place stamped blank inside depression and hold punch in center of blank. Then strike punch with a metal stamping hammer until blank is domed.

*Rated for stamping on soft metals: Alkemé, aluminum, pewter, copper, brass, silver, and gold.

• Standard size : Japan

Great for personalizing jewelry & craft components! Constructed of steel & packaged in a deluxe wooden storage box with Individually labeled slots to help keep the punches organized. Each set includes 26 A-Z letter punches, an "&" symbol, and 9 number punches (use the same punch for 6 & 9).
Use them to stamp copper, silver, brass, as well as wood, plastic, and leather & more. PLUS, our stamps include a fool-proof method to ensure your letters/ symbols are right side up every time! Simply place your thumb on the side of the punch with marked and the stamped letter will face the correct way (to stamp a 9, hold the 6/9 punch with the marked side under your forefinger).
Stamps are Gothic font, available in both Lowecase and Uppercase
PUNCTUATION:Set includes 9 punctuation punches: $ ! , ? @ . # )"

Ideally suited for creating bracelets, this tool can make large curves into flat metal stock without marring engraved or embellished surfaces.

• Ideal for making bracelets quickly & easily
• Creates large radius curves into flat metal stock
• Lap joint construction
• Foam grip handles
• Two cylinder size(diameter)
  • Small: 25.4mm&34.9mm
  • Large: 34.9mm&41.3mm

• Anticlastic pliers
  Anticlastic pliers are similar to synclastic but produce a curve in opposite ways in two directions (saddle-shaped). Produces a fine, finished product in a fraction of the time without having to use a dapping tool. Total length: 8".
• Synclastic pliers
  Synclastic pliers put a curve toward the same side in all directions. Create a bracelet in minutes, not hours. Also makes rings, bangles and is indispensable in doing jewelry repair. Length 8".

Contains:

• Round nose plier
• Side cutter
• Chain nose plier
• Scoop
• Split ring tweezer
• Knotting tweezer
• Nylon jaw flat nose plier
• Knot cutter
• Crimping plier

These set has everything you need to personalize; stamp; and cut your clay! For use with all clay types; this set makes it easy to make your own work of art! This set contains 160 alphabet; numeral; and symbol tiles; one tile holder; and one storage pouch.
Size font : 7x5mm

With this template you can create cute and fashionable bag easily.

Get a professional, high-gloss finish with the Lortone 4-step tumbler grit set.
Use with the Lortone Model Rotary Tumbler to create a quality polish on hard stones at a low cost.

Set includes enough material to polish up 12 pounds of rock:

• Step 1 - Coarse (16 ounces, 60/90 grit silicon carbide)
  Use for initial grinding and shaping of rough stone.
• Step 2 - Medium/Fine (14 ounces, 120/220 grit silicon carbide)
  Use for smoothing stone surface after initial shaping.
• Step 3 - Pre-Polish (12 ounces, aluminum oxide)
  Use to prepare stones for final polishing.
• Step 4 - Polish (12 ounces, ultra-fine aluminum oxide)
  Use for final polishing on pre-polished stones.

These KIT includes all material needed to make this project, but NOT include glue or tools which might be needed ( scissor , cutter etc ).