Create professional looking ear wires in any color wire in just one squeeze. Simply cut a 2 inch length of wire, insert into the open ear wire maker and squeeze the handles together!
Tool will accept 20 to 24 gauge wire. This is both a time and a money saver. You will be creating the basis for multiple sets of earrings in mere minutes.

These hard to find pliers are specially designed for wire wrapping, making loops and earrings and other similar tasks. They have one round jaw, the other is flat and has 3 grooves enabling you to repeat three exact sizes of loops.
The round jaw is smooth with a nice taper and the flat jaw tapers to a fine point so you can see exactly what you are doing.
these are wonderful quality pliers that feel good in your hand and the grooves make it easy to produce consistant loops in your jewellery making.

Top jaw has 3 sizes to help create a wide variety of loop sizes. Type B : diameter of the tip : 2mm (good for making medium loop)
Box joint construction with red vinyl handles. 5 inches (12.7cm).

Multi-Step Wire looping plier: Make consistant loops using the 3 barrels
The lower jaw is covered with PVC tubing to prevent scratching or marring the wire
Features stainless steel heads and cushion grips
Barrels measure:
5, 7, & 10mm
13, 16, & 20mm

The perfect tool for holding flat stock during finishing.
Jaws are 1-1/4" long and 5/8" wide at the tips. 6-1/2" long overall with box joint construction.

Double Cylinder Bracelet Pliers have two different sized cylinders which are used to quickly put large radius curves into flat metal stock. Result can easily be resized on mandrel if desired. Perfect for making mens' and womens' bracelets.
Length: 165mm

Put a clean, consistent radius curve into flat metal stock with our 3/4" (19mm) and 1-3/8" (35mm) Miland Channel Ring Maker pliers. Can easily be resized on a mandrel. Engraving or designs can be added to flat stock before forming with the worry of marring the metal when forming.

Ideally suited for creating bracelets, this tool can make large curves into flat metal stock without marring engraved or embellished surfaces.

• Ideal for making bracelets quickly & easily
• Creates large radius curves into flat metal stock
• Lap joint construction
• Foam grip handles
• Two cylinder size(diameter)
  • Small: 25.4mm&34.9mm
  • Large: 34.9mm&41.3mm

This plier features non-graduated cylinders which create perfect loops every time! It’s the perfect size for constructing coil ends and connectors to finish necklaces made with leather or other types of cord.
Quality lapjoint construction with double-leaf springs to reduce hand fatigue.

** Grips and packages might vary. **

Wubbers has done it again! Wrap beads and make eyepins perfect every time. Never before has there been a pair of pliers that can do so much, and so easy to learn.The unique jaw shape and size provides for a consistent finish. .

This plier has two types of jaw, Flat and half-round, making it perfect for bending & shaping wire & flat metal.
Features boxjoint construction, a polished steel head, & a double-leaf spring to reduce hand fatigue

Wubbers Square Mandrel Pliers are good for a number of uses including making even coils, square jump rings, tubes, square beads, and much more! The large, padded, turquoise handles are extra comfortable and measure 6-1/4" long.
The square jaws are a continuous square mandrel (as opposed to being tapered). In addition, the jaws are two different sizes so that you may create a wide variety of square shaped pieces.
The length of each jaw is 34mm.

Small: The larger jaw measures approximately 5mm square and the smaller is 3mm square.
Medium: The larger jaw measures approximately 8mm square and the smaller is 6mm square.

A favorite among wire-working jewelers, this pair of Wubbers® half-round mandrel pliers creates round loops in two sizes. Versatile, comfortable and practical to use, these pliers feature handles angled to give you a powerful grip. Use these half-round mandrel pliers to make smooth curves and half-round components!

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

• For crimping 2-3mm pipe

• For crimping 3-4mm pipe

New from Xuron® -- a bead crimping plier that precisely crimps/folds 1, 2, and 3 millimeter crimp tubes and includes a chain nose plier for handling delicate beads, micro-crimps and for adding an extra squeeze to your crimps, if desired.
The folding stations are designed to fit three different size crimp tubes (1, 2 & 3 mm) and ensure a secure and attractive result.
As with all Xuron® Pliers, the 4 in 1 Crimper has soft rubber hand grips and a return spring that opens the tool after each squeeze.

• Anticlastic pliers
  Anticlastic pliers are similar to synclastic but produce a curve in opposite ways in two directions (saddle-shaped). Produces a fine, finished product in a fraction of the time without having to use a dapping tool. Total length: 8".
• Synclastic pliers
  Synclastic pliers put a curve toward the same side in all directions. Create a bracelet in minutes, not hours. Also makes rings, bangles and is indispensable in doing jewelry repair. Length 8".