This water based adhesive is excellent to bond your leatherwork. It also works great on wood or paper, dries clear. Should excess glue accumulate on unwanted areas, simply burnish off when dry or semi-dry.
Constituent:Vinyl Acetate
Simply apply with a brush to both sides of the leather you wish to glue, put them together before glue dries out. You can adjust the position during bonding because it does not dry quickly.

This water based adhesive is excellent to bond your leatherwork. It also works great on wood or paper, dries clear. Should excess glue accumulate on unwanted areas, simply burnish off when dry or semi-dry.
Simply apply with a brush to both sides of the leather you wish to glue, then press together and hold until bonded.

This water based adhesive is excellent to bond your leatherwork. It also works great on wood or paper, dries clear. Should excess glue accumulate on unwanted areas, simply burnish off when dry or semi-dry.
Simply apply with a brush to both sides of the leather you wish to glue, then press together and hold until bonded.
Note : #600 is "thick", suitable for inserting edge of leather into hardware. (kuchi gane)

1 x Small cement pot with cover cone, holds approximately 400 ml , made of hard clear plastic. Use for latex or rubber base cements.
Easy to clean. Includes one brush.
Size:400ml (13.5 fl. oz)
Material:Plastic

The best way for removing excess adhesive/cement in small areas and tight corners from your leather goods.