Search results Login
Sort by
ImageName
MD-1M-00101A1
Mold making Oyumaru ( mix color ) / 1set
Make your own molds, using only hot water!
Great Japanese moulding material which is re-usable, so you can keep using it for different mould shapes. Perfect if you need to make lots of moulds but only need to use each to create few copies. Picks up detail surprisingly well.
  • Dip a piece of the oyumaru in hot water (approx: 80 degree C) for about 3 to 5 mins. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel.
  • While it is still soft, press the material you wish to mold into the Oyumaru. If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.
  • Allow Oyumaru to cool down, remove your object and your mold is ready.
  • Oyumaru is reusable.
  • Material : SBS no hazardous material compound (non PVC), conforms to safety requirements of ASTM D-4263 and EN71
  • Option
    • Oyumaru 300 : 1 box 7 pcs mix color.
    • Oyumaru 600 : 1 box 12 pcs (6 colors x 2 each) and 2pcs mold bonus.
    • Oyumaru 1000 : 1 box 24 pcs (12 colors x 2 each)

ID: 3817 Options
Back Order OK		 ¥
380
MD-1M-00101B1
Mold making Oyumaru ( single color ) / 1pkg ( 6pc)
Make your own molds, using only hot water!
Great Japanese moulding material which is re-usable, so you can keep using it for different mould shapes. Perfect if you need to make lots of moulds but only need to use each to create few copies. Picks up detail surprisingly well.
  • Dip a piece of the oyumaru in hot water (approx: 80 degree C) for about 3 to 5 mins. Take the Oyumaru out of the water with a pair of tongs and wipe it dry with a towel.
  • While it is still soft, press the material you wish to mold into the Oyumaru. If the Oyumaru gets hard while you are working with it, place it back in the water and begin the process again.
  • Allow Oyumaru to cool down, remove your object and your mold is ready.
  • Oyumaru is reusable.
  • Material : SBS no hazardous material compound (non PVC), conforms to safety requirements of ASTM D-4263 and EN71
1 box 6 pcs single color (clear white)
  • Size: 60 x 15mm / stick
    • ID: 4191
    Back Order OK    		 ¥
    270
    MD-1M-00101C1
    Iropura / 1set
    It is soft and become clay in hot water.
    How to use
    [1] Prepare the hot water.
    [2] It becomes soft in the 2 to 3 minutes.
    [3] taken out and takes the moisture.
    [4] creates a form.
    [5] harden allow to cool in the water.

  • 8 x 1.3 cm
    • ID: 4189 Options
    Back Order OK    		 ¥
    108
    MD-1M-00101E1
    Amazing Remelt (Red) / 1pc
    Amazing Remelt is a Non Toxic, 1-part reusable mold making material for room temperature or low exotherm materials. Amazing Remelt softens at 120°F and becomes liquid at 135°-140°F. It can be remelted and reused to make new molds time and time again. Ideal for making mold for smaller items such as jewelry, embellishments, and chocolate molds.
    ID: 4190 Options
    		 Stock: 0
    Booking     		¥
    2,200
    MD-1M-00101E3
    Composimold ( reusable molding material ) / 1pc

  • Size: 280 gram ( 10 oz )
    • ID: 4193 Options
    		 Stock: 0
    Booking     		¥
    2,900
    MD-1M-00201A1
    Sculpey Mold Maker / 1pc
    Make your own molds with this unique material. It can also be used to soften and condition clay when mixed with clay.
    This package contains one 8 ounce block of mold maker.
    Bake at 275 °F (130 °C) for 15 minutes per 1/4 in (6 mm) thickness.
  • Made in USA
    • ID: 9884 Stock: 2 ¥
    1,600
    MD-1M-00201C1
    Amaco Mix-a-Mold / 1pc
    In just two minutes, you're ready to make perfect reproductions in perfect detail. Works with virtually any casting medium.

    Mix-a-MoldTM makes it easier than ever before to make perfect reproductions of three dimensional objects. Mix-a-MoldTM is fast and fun and picks up every detail. Supplied in powder form, it mixes with water and the mold is ready in two minutes. Fill the mold with any other casting medium.

    Follow the directions on the box for mixing ratios, but remember that you can speed the setting time by increasing the Mix-A-Mold™ used or delay the setting time by increasing the water used. Either way it still will set up in a few minutes. When set, it is a soft and rubbery material. It can be used even when you have undercuts because of its great flexibility.
    ID: 1647 Stock: 1 ¥
    1,680
    MD-1M-00202G1
    Silicon mold maker : Cold mold (USA) / 1set
    Now you can make a rubber mold for wax injection or clay making, without heat and without mixing and pouring liquids. This 0% shrinkage silicone rubber is a 2-part putty that you simply knead together and then press into a standard mold frame to cure under pressure, without heat for 15-30 minutes. Packaged in two containers, part A (white) and part B (purple) of total 30grams
    • Working Time: 2 min. (approx)
    • Cure Time: 15 - 30 min. (approx)
    • Shrinkage: 0%
    • Tensile Strength: 400 psi
    • Tear Strength: 55 ppi
    • Elongation: 375%

    ID: 5952 Stock: 9 ¥
    990
    MD-1M-00202G3
    Apoxie Sculpt - 113.5 grams (4 Oz.) / 1set
    Apoxie® Sculpt is a non-toxic, two-part sculptural epoxy ideal for creating pavé jewelry designs. Super white color offers a crisp white base for embellishing.

    Combining the sculpting benefits of clay with the adhesive power of epoxy, Apoxie Sculpt epoxy secures SWAROVSKI ELEMENTS flat back and chaton crystal rhinestones for sparkling jewelry creations. Also adheres to cabochons, crystals, glass, plastic, metal, wood and more.

    ID: 12820 Options
    		 Stock: 2 ¥
    1,830
    MD-1M-00202G5
    Silicon mold maker : Padico brand / 1set

  • Size: A+B (100gram + 100gram)
    • ID: 5950
    Back Order OK    		 ¥
    2,200
    MD-1M-00202R1
    Ice Resin molding putty Art Mechanique 2 Part / 1set
    Ice Resin molding putty is a 2 part silicone putty that can be kneaded together to create molds for casting. Simple to mix, it allows for a full 3 minutes of working time and yet will be fully cured and ready for casting Ice Resin® in 15 minutes! The resolution quality is excellent in this jeweler’s grade putty and high definition molds can be easily made.
    Art Mechanique 2 Part 6oz- This modeling putty is ideal for making molds of small items like buttons, charms, etc. Molds may be used several times before they start to dry out and crack.
  • Size( A+B ): 6 oz (170 gram )
    • ID: 16629 Stock: 0
    Booking     		¥
    2,100
    MD-1M-00202T1
    Mold material : Castaldo 2 part molding putty / 1set
    Castaldo Quick-Sil is a two-part RTV (room temperature vulcanizing) silicone molding putty that produces strong production silicone rubber jewelry molds. The easy-to-use putty works great for lost wax casting and can also be used for direct casting of low-temperature metals such as pewter and tin. Simply mix equal amounts of Part A and Part B to produce finished jewelry molds. With a 1-2 minute working time, non-toxic Quick-Sil molding compound has a cure time of only 15 minutes with 0% shrinkage. Great for use with Art Clay®, BRONZclay™, COPPRclay™, Apoxie® Sculpt and Kato Polyclay™. Includes instructions. Made in the USA.
  • Size: A+B (50gram + 50gram)
    • ID: 14742 Stock: 1 ¥
    1,990
    MD-1M-00202U1
    EasyMold Silicone Putty / 1set
    EasyMold Silicone Putty is ideal for a wide range of impression type mold applications, including Castin’Craft Clear Casting Resin, EasyCast Clear Casting Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals! EasyMold is a easy to use, Odor Free, Non-Toxic, FDA compliant – Food Grade, two component silicone putty.

  • Size( A+B ): 227 gram
    (113 gram x 2 bottles)
    • ID: 16630 Stock: 0
    Booking     		¥
    3,290
    MD-1M-00202Z1
    Amazing Mold Putty Kit / 1set
    Make your own molds for resin, food, soap, wax, clay and more with this amazing mold putty. It is quick, easy and safe. The entire process takes less than 25 minutes. It is food grade and FDA compliant. It requires no equipment, cups or stir sticks. Simply measure and mix by hand.
  • Size( A+B ): 300 gram
    (150 gram x 2 bottles)
    • ID: 16646 Stock: 0
    Booking     		¥
    2,860
    MD-1M-00202Z2
    Amazing Mold Rubber Kit / 1set
    The Amazing Mold Rubber is a quick curing, high strength, elastic mold making material that picks up amazing detail. Molds can be demolded in as little as 2-4 hours. Great for pouring one piece molds with undercuts requiring a strong flexible material for demolding parts.
  • Size( Base+catalyst ): 349.3 gram
    (Base 317.5 gram , catalyst 31.75 gram)
    • ID: 16647 Stock: 0
    Booking     		¥
    2,200
    MD-1M-00202Z3
    Alumilite High Strength 3 ( Liquid Mold Making Rubber ) / 1set
    Alumilite's High Strength 3 silicone mold making rubber is our most flexible silicone mold making rubber and is great for making molds of parts with deep undercuts or negative drafts. The High Strength 3’s flexibility and high tear strength give it the ability to reduce seam lines by making one piece molds rather than multiple piece molds where seam line removal is critical. The High Strength 3 is a tin base silicone and cures against all different types of clay and substrate. The tin base silicone is a condensation cure and therefore temperature and humidity may affect the cure speed of the rubber. The High Strength 3 has a low viscosity which does not require degassing (always recommended when available) and will pick up the exact detail of your original.
  • Size( Base+catalyst ): 454 gram
    (Base 411.5 gram , catalyst 42.5 gram)
    • ID: 16640 Stock: 0
    Booking     		¥
    3,900
    MD-1M-00203A1
    Mold material Blue Mix / 1set
    This is a 2 part Silicone moulding compound for making molds in Japan.
    Use this very high quality moulding compound to make a mould from your favourite button, piece of jewellery, seed pod, shell or other interesting texture. Then press your metal clay into the mould to create a fine silver replica. This 2 part product is very easy to work with, it mixes easily, and is nice and flexible after curing so it is easy to get your dry clay out of the mould. Picks up fine details so excellent for fingerprints.
    ID: 694 Options
    Back Order OK    		 ¥
    950
    MD-1M-00204A1
    Mold material : 5 minute cold molding compound / 1set
    Mix equal amounts from each 10-ounce jar blending the putty until it is all one color then press a finding or shape into the putty and leave for 5-minutes. Putty will set up and still be flexible enough to release the finding. Use the new mold over and over with metal clay.

    The life of the product lasts approximately 6-8 months after the container is opened.

  • 10 oz (280 gram) each bottle
    • ID: 14741 Stock: 4 ¥
    4,120
    MD-1M-00205A3
    Mold material : Katatoru / 1 kg
    • This is a food-grade alginate, a water-based skin-safe molding powder, to cast hand molds, or.. other things.
      This Alginate molding compound forms a rubbery elastomer within minutes of mixing with water. Captures impressive detail, while being flexible enough to prevent entrapment of the hand. It dries and shrinks over time.

    ID: 16637
    Back Order OK    		 ¥
    3,200
    xx
    Mold Builder Liquid Latex Rubber / 1pc
    Castin'Craft Mold Builder is a natural, liquid latex rubber used to make your own molds.
    Create highly detailed, reusable molds.
    Can be used on models made of metal, clay, plaster, wood, plastic or glass.
    Brass or copper should first be coated with an acrylic lacquer or shellac.
    Seal porous materials like clay, plaster and wood with a paste wax.

  • H930x945mm 473ml
    • ID: 16638 Stock: 0
    Booking     		¥
    2,980