Japanese Craft

Beads & Jewelry

Other Category

Login

Image

Name

MD-1M-00202U1
EasyMold Silicone Putty / 1set
EasyMold Silicone Putty is ideal for a wide range of impression type mold applications, including Castin’Craft Clear Casting Resin, EasyCast Clear Casting Epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals! EasyMold is a easy to use, Odor Free, Non-Toxic, FDA compliant – Food Grade, two component silicone putty.

Size( A+B ): 227 gram
(113 gram x 2 bottles)

ID: 16630

Stock: 3

¥

3,290

MD-1MR-1001A1
Mold release (Japan made) / 1pc
Just wipe your mold using this release agent, and you can lift up your clay from your mold easily.

Size: 5cc

ID: 5671

Stock: 3

¥

290

MD-1MR-1003A1
Mold release (USA made) / 1pc
All molds require mold release when casting with EasyCast Clear Casting Epoxy or Clear Polyester Casting Resin.
Use this product as a release agent, and to clean, condition, and extend the life of molds. It is odorless and solvent free.
Spray Pump Bottle — It contains 4 oz (118 ml) in a handy spray pump bottle.

Size: 118ml

ID: 5672

buy 10=20%

Stock: 2

¥

1,900

PO-PLAS-A1008
Ecozai A1 : Mold release
EcoZai A1 release agent / 1pc
EcoZai A1 release agent is a petrolatum based wax formulated specifically to release EcoZai A1 casting/laminating products from either plaster or from cured EcoZai A1 itself. It also maybe used as a release agent for rigid polyester molds.
Application Apply to a plaster or EcoZai A1 Using Foam brush or cloth, apply into the “grain” of the mold. Then, using asecond, clean piece of terry cloth, rub off the wax leaving a thin film.Repeat the above procedure for a second time.
Please note: DO NOT use to much (too thick), excess can cause“pocketing” of the gel coat and will decrease releaseproperties.

Bottle : 50 gram

ID: 16714

Stock: 9

¥

980

TO-MOLDR00021
Soft Mold for Resin / 1pc

ID: 13154

Stock: 1009

¥

0

TO-MOLDR00027
Mold for Resin Casting / 1pc
Material: heavyweight Polypropilene plastic molds.
This mold is used for "Resin casting" or clay, to make your own design accessories / jewelry.
Please use "MOLD RELEASE" before using, for easy releasing the casting from the mold.

For "RESIN Casting" material click here

ID: 12023

Options

Stock: 6

¥

580

TO-MOLDR00028
Mold for Resin Casting / 1pc
Material: heavyweight Polypropilene plastic molds.
This mold is used for "Resin casting" or clay, to make your own design accessories / jewelry.
Please use "MOLD RELEASE" before using, for easy releasing the casting from the mold.

For "RESIN Casting" material click here

For size comparison : item "H" is 25mm diameter.

Size; 18.5cm x 17cm

ID: 12024

Options

Stock: 10

¥

580

TO-MOLDR00029
Mold for Resin Casting / 1pc
Material: heavyweight Polypropilene plastic molds.
This mold is used for "Resin casting" or clay, to make your own design accessories / jewelry.
Please use "MOLD RELEASE" before using, for easy releasing the casting from the mold.
For size comparison : Oval (upper right) is 40x30mm

For "RESIN Casting" material click here

ID: 12025

Options

Stock: 3

¥

880

TO-TEXS-0125A
Dinasty stamp series / 1pc
The details in this texture sheet are deeply etched, then molded onto a rubber sheet to ensure clear, crisp impressions in your metal clay.
Coat the sheet with an anti-stick (mold release) for defect-free release. This large-size sheet provides nearly 60 sq. in. of textures for you to choose from. In addition to a full set of stylized lower-case letters, the sheet contains a whimsical 7" x 7" free-hand scene bursting with chrysanthemums, butterflies, hearts and other design elements—including customizable blanks ideal for stone-setting and an endless variety of other imaginative uses.

Size: 22×18×0.2 cm

ID: 2357

Options

Stock: 1

¥

4,410