Make a perfect measured square loop every time with Acculoop2! Jaws clearly marked with measurements for making loops that range from 2-8mm. Length 6-1/2".

Top jaw has 3 sizes to help create a wide variety of loop sizes. Type B : diameter of the tip : 2mm (good for making medium loop)
Box joint construction with red vinyl handles. 5 inches (12.7cm).

Multi-Step Wire looping plier: Make consistant loops using the 3 barrels
The lower jaw is covered with PVC tubing to prevent scratching or marring the wire
Features stainless steel heads and cushion grips
Barrels measure:
5, 7, & 10mm
13, 16, & 20mm

These duck-bill pliers feature a flat interior surface on both jaws; they are ideal for working with oversized or heavy-gauge jump rings and pieces with larger interior diameters.
The wide jaws can also function as a bending brake, helping you create smooth, even bends in sheet and wire.
A jaw stop allows you to set the opening size of the jaws so you minimize the squeezing needed for each bend you make and repeatably achieve the same pressure and curvature as you shape your metal.
Parallel-action pliers have jaws that remain parallel regardless of the range of motion the pliers themselves are put through.
Their jaws hold the object securely, even under very firm pressure.
Choose parallel-action pliers when you need to hold a workpiece or other object securely while at the same time applying firm pressure to it, or when manipulating wire (you can feed the wire down through the throat and hold it firmly over the entire length of the jaw).

Put a clean, consistent radius curve into flat metal stock with our 3/4" (19mm) and 1-3/8" (35mm) Miland Channel Ring Maker pliers. Can easily be resized on a mandrel. Engraving or designs can be added to flat stock before forming with the worry of marring the metal when forming.

This plier features non-graduated cylinders which create perfect loops every time! It’s the perfect size for constructing coil ends and connectors to finish necklaces made with leather or other types of cord.
Quality lapjoint construction with double-leaf springs to reduce hand fatigue.

** Grips and packages might vary. **

Wubbers has done it again! Wrap beads and make eyepins perfect every time. Never before has there been a pair of pliers that can do so much, and so easy to learn.The unique jaw shape and size provides for a consistent finish. .

This plier has two types of jaw, Flat and half-round, making it perfect for bending & shaping wire & flat metal.
Features boxjoint construction, a polished steel head, & a double-leaf spring to reduce hand fatigue

Wubbers Square Mandrel Pliers are good for a number of uses including making even coils, square jump rings, tubes, square beads, and much more! The large, padded, turquoise handles are extra comfortable and measure 6-1/4" long.
The square jaws are a continuous square mandrel (as opposed to being tapered). In addition, the jaws are two different sizes so that you may create a wide variety of square shaped pieces.
The length of each jaw is 34mm.

Small: The larger jaw measures approximately 5mm square and the smaller is 3mm square.
Medium: The larger jaw measures approximately 8mm square and the smaller is 6mm square.

A favorite among wire-working jewelers, this pair of Wubbers® half-round mandrel pliers creates round loops in two sizes. Versatile, comfortable and practical to use, these pliers feature handles angled to give you a powerful grip. Use these half-round mandrel pliers to make smooth curves and half-round components!

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the ball where you want the middle of the dimple . Squeeze the plier to create a dimple. The ergonomic design requires little force. The deep jaw allows 3/4" depth. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Place the point of the hooked jaw at the exact spot you wish to drill. Squeeze the plier to create a dimple. The ergonomic design requires little force. The hooked jaw allows easy reach into tight spots. Recommended for soft or annealed metals 24 gauge or lighter and any thickness of metal clay that can fit into the jaws.

Make the dimple on the flat or non-textured side of a metal clay piece for easier drilling.

Jump Ring Closing Pliers have a groove at the tip to hold jump rings for soldering or closing.

• For crimping 2-3mm pipe

• For crimping 3-4mm pipe