Cut foamboard V-grooves to perfection using the FoamWerks Foamboard V-Groove Cutter. Features include adjustable blade depth, quick change blade clips, magnetic blade slot, on-board blade storage drawer and five blades. Will V-groove in up to 1/2" thick foamboard. Use with FoamWerks Channel Rail, Logan Adapt-A-Rule or Team System. Use replacement blades WC-5, WC-20 or WC-50.
IMPORTANT: Always use a scrap piece of foamboard underneath the piece you are cutting. This is to protect the tool and extend the life of the blades.

A surface marking guide tool for suitable cosplay material to be used with any common marking device. Used to draw parallel lines along various shapes from 1/8" to 7" (3 mm to 18 cm). Accepts marking devices up to 1/2" (13 mm) thick. Trace perfect lines around the edge of your cosplay materials.

Drill perfect holes in foamboard using one of three interchangeable quick-change drill tips included. Choose 3/4", 1/2" and 0.28" diameters. The Hole Drill WD-8011 works with 3/16" foamboard. Choose from replacement tips sold separately WD-18 (0.18"), WD-28 (0.28"), WD-50 (0.50") or WD-75 (0.75").

With this basic model of the Miter Cut Guide, one can precisely cut 90 degree, and 45 degree angles for miter joints. It is designed to be used with saws with blade thicknesses between 0.4 mm and 0.6 mm. It adapts equally well for right- and left-handed people, as one simply mounts the guide assembly on the appropriate end of the base plate.
This miter guide is delivered include a saw, an allen wrench for assembly and two guide fences, one for normal work and a second for longer cuts.

The most difficult part of cutting wood to length with a circular or jig saw, is accurately aligning the saw blade to our pencil mark. Unlike a standard square, the Square Cut Guide allowing you to instantly align your saw blade to the pencil mark and make perfect 90-Degree cuts, time after time.
No-slip rubber feet and a little gentle pressure hold the Square Cut Guide in place. Made of durable, impact resistant aluminium. Perfect for any brand of circular saw or jig saw.
Supports work pieces up to 150mm wide
Low-profile design won't interfere with saw
Weight: 250 gr

The best way to cut a great mat is with a sharp blade. Logan replacement blades are the only blades specifically sharpened to give a professional finished edge to a mat. Always use Logan replacement blades in your cutter for outstanding results.

** 270-10 might be supplied in a small zip package.

• WA series : for the Circle Cutter WA-8001
• WB series : for the Freestyle Cutter WB-6020.
• WC series : for the Straight Cutter (WC-6001), Straight/Bevel Cutter (WC-6010), Rabbet Cutter (WC-4010), and V-Groove Cutter (WC-2001)

This diamond bit set can use for stone, wood, and metal also.
Bit 2.35mm diameter (shaft)

Drill holes of every size and shape in even the hardest material with diamond-coated steel bits. Use in rotary tools or bead reamers for a smooth, even hole.
Kit includes: 5 ball , 7 cylinder with flat tops, 6 cylinder with round tops, 1 sharp cone, 1 tree, 3 points, 1 cone, 2 bullet, 1 echelon, 1 long point, 1 flat cone and 1 long sharp cone burrs.

• NOVA Polishing Points are resin bonded with diamond

• Rubber pad only
  Ini adalah PAD saja, dengan AS ukuran 1/8 inch (3.2mm) dengan ujung PAD dari karet ukuran pad 3/4inch (19mm). Anda bisa pasang Diamond disc (pilih grit yang cocok) di ujung pad ini.
• Diamond smoothing disc
  Diamond smoothing disc ini harus di pasang di ujung PAD.
  Ada beberapa ukuran grit, pilih sesuai kebutuhan.
  Disc ini di jual per pak isi 3 lembar disc

The Lazee Daizee Viking Knit Tool makes learning the centuries-old woven technique easier than ever - no more start-up prep, dowels or vises, just hold the tool in your hand and start weaving. Adding new wire is easy with the anchor hole and the hexagon-shaped rod limits the need for needle tools that may damage or scratch coated wires. Make your own wire-wrapped end caps with the End Coil Shaper.

** Color of pouches will vary. **

Delrin® draw plates provide an easy way to condense, lengthen and create a uniform finish for knit, braided and woven wire.
Delrin plastic is a lightweight, durable material that will not mar your creation.
Plates have graduated hole sizes; from 1mm all the way up to 12.5mm.

can be used with all types of wire, including colored wire. Its use is to condenses the diameter of knitted wire work without scratching or marring the surface of the wire. The wire work will increase in length as it is drawn down.

Quick-Slide locking pin vise is ideal for holding wires with a maximum capacity of 1.3mm, slotted hole through. (long wire can go through)
Great for holding earring post and many other articles while work is performed (soldering, setting, and polishing).