Use this color scale to mix different color clay to get another mixture color.
You can get almost same results everytime you mix the color.
Including color chart for mixing (40 colors for Hearty and 40 colors for Modena).

These texture sheets are a quick way to add textures to your clay projects. Includes 4 sheets per package. Each sheet is a different pattern. Many sets of sheets available!

AMACO® PolyBlade™ Clay Cutter is a blade designed specifically for use with polymer clay. They are made of stainless steel and lasts 2 to 3 times longer than other blades. Use with extreme care. Flexible- super flexible blade makes curved cuts and arcs in polymer clay or canes. It is a full 20cm (6") long and makes micro thin cuts. This blade allows the user to create a wide variety of shapes that cannot be made with other blades.
Very sharp , Not for use by children.

**Package may vary.**

Breaking with a sharp blade!
· Resin clay can be sliced easily. · It can be used in bent state.

Studio Super Slicer, with comfort handles. These long, thin blades cut smoothly through clay while the interchangeable comfort handles protect hands and fingers. Includes four different blades (rigid, flexible, wavy and rick-rack) and one set of snap-on handles.

The Kato Nu Blade is a 150mm (6inch) stainless steel blade with molded on
handles for safer- controlled clean cutting of polymer clay
For safer, controlled cuts; makes both straight and curved cuts.
Permanently attached handles provide added control for perfect cuts and
both finger safety.

Create perfectly parallel strips of clay in just about any width up to 1/2" (12mm) with this hand blade tool. The tool comes with five blades and 12 pairs of brass washers. Arrange the blades and washers in a variety of configurations to achieve the cut width you want. For example, use two blades with all 12 washer pairs to create a single strip approximately 1/2" wide. Or use all five blades separated by single washer pairs to create four strips approximately 1/32" (.8mm) wide. Mix and match blades and washers to achieve whatever width (or widths) you like. Roll out your metal clay, or start with a sheet of PMC® paper. Hold the blade tool at a slight angle, apply firm pressure and pull the blades through the clay slowly and smoothly.
Blade size: 2.25 inch (W) x 0.75 inch(H)

* Set of a handle with 1 roller, 1 cutter and 1 wave cutter.
* Roll out the clay to desired thickness.
* Use cutters for cutting straight or wavy lines.

12 unique designs to make perfect shapes every time. Great for use with oven-bake clay for jewelry making, paper crafting.

Roll clay to desired thickness (using roller or pasta machine) then cut out petals and leaves using shape maker cutters. Assemble flowers and ferns.
Clean the cutter with soap and water after use

• A: Rose and daisy petal flower
• B: Petals for tulips, irises, 5 petal flowers, small sunflowers, small daisies, small coneflowers, trailing flowers, etc
• C: Leaves for holly, vines and various flowers.
• D: Large leaves for various large flowers, vines and foliage.
• E: Maple, and various vern.
• F: Ginko leaves, oak leaves, and heart shape leaves.

This is clay cutter to make flower clay, which is explained in these book / DVD bellow.

These embossing cutters are ideal for creating beautiful embellishments, accents, or jewelry components from moldable mediums including: polymer, metal, and air dry paper clays. These versatile tools can be used to cut out the desired shape in seconds with beautiful, consistent results time after time. You can cut out using only the outline, leaving the surface flat and unadorned, or emboss the surface with a push of the spring-loaded plunger. Create stunning effects on polymer and air dry paper clays using Foils, decorative powders, metal clay or water-based paints.

Ideal for cutting out windows in clay projects, square hole clay cutter from Kemper® is designed with a built-in plunger to push clay out. Made of high-quality brass with rubber tip for comfort.
Length: 10cm

Kemper Klay Kutter set
Lovely brass cutters made for polymer clay and precious metal clay. These cutters give perfect clean cuts as the cutter is shaped from a brass tube, with no visible joins. Each cutter has a plunger ("pusher-outer") to help you push the clay shape out of the cutter. The cutters are also great for sugar paste, bread dough, soft wax, paint, and modelling paste. You might want to put a little badger balm, olive oil, Slik or similar, around the edge of the cutter to help release the metal clay.

Each set shown below consists of 5 or 7 cutters (depends on the sets) and the price is different for each set.

Kemper Klay Kutter set
Lovely brass cutters made for polymer clay and precious metal clay. These cutters give perfect clean cuts as the cutter is shaped from a brass tube, with no visible joins. Each cutter has a plunger ("pusher-outer") to help you push the clay shape out of the cutter. The cutters are also great for sugar paste, bread dough, soft wax, paint, and modelling paste. You might want to put a little badger balm, olive oil, Slik or similar, around the edge of the cutter to help release the metal clay.

Each set shown below consists of 4 or 5 cutters (depends on the sets) and the price is different for each set.

The clay gun extruder has many uses. With the 20 disc designs you can create many different embellishments for your projects. The round discs are for vines, stems, borders, and letters. The screen discs are for hair, grass, straw and floral stamens.The flat slot discs are for weaving baskets, lattice, ribbons and bows. The square, triangle, half round discs are for bricks, logs, borders, and can be cut and used for small beads.

The clay gun extruder has many uses. With the 20 disc designs you can create many different embellishments for your projects. The round discs are for vines, stems, borders, and letters. The screen discs are for hair, grass, straw and floral stamens.The flat slot discs are for weaving baskets, lattice, ribbons and bows. The square, triangle, half round discs are for bricks, logs, borders, and can be cut and used for small beads.

The "Makin's Professional® Ultimate Extruder Set" combines the next generation of the Makin's® patented screw-type extruder, 20 popular disc designs and 2 extra O-rings in a convenient and secure storage case. The new commercial grade stainless steel extruder incorporates an L-shaped handle with ergonomic grip that can be adjusted to optimize user's comfort, control and torque requirements. The discs included are an assortment of designs frequently used by artists when creating geometric embellishments and complex armatures. The durable case has an easy-accessible resting place for the extruder, ten separators which keep extruder accessories organized in individual storage compartments, a clear see-through top and a double latch locking mechanism. The Makin's® extruder has been accepted in the polymer clay, cake decorating and other industries world-wide as being very durable and designed to meet the diverse applications of professionals working with various types of modeling mediums. For best results thoroughly condition modeling medium to achieve a malleable consistency.

FDA approved ( suitable for food )

• This PRO Extruder is a heavy-duty extruder, specially designed for the viscosity of polymer clay with a 26 thrust capacity in the trigger. You can extrude as much as a pound of conditioned clay in the 2 inch (5cm diameter)barrel.
  Note :
  
• This extruder is NOT include the disk
  
• The disk (to make the pattern) is made by order from "laser cut acrylic"
  
• Please send us the drawing, we will produce for you
  
• The price for the "pattern disk" is USD 5 each