Size : 135 x 60 mm
Stainless Steel , nylon
Made In Japan

Size : 135 x 60 mm
Stainless Steel , nylon
Made In Japan

Size : 135 x 60 mm
Stainless Steel , nylon
Made In Japan

Give a new twist to your designs with our new Parallel Action Zig-Zag Bending Plier. This simple to use parallel plier reduces repetitive wrist motion and saves time because it creates several zig-zags all at once. Simply place the wire in the jaw and squeeze - instantly you have one inch of uniform zig-zag design. Move the wire over to easily continue the zig-zag pattern in the desired length. Use on 20 gauge or lighter soft wire, 24 gauge or lighter soft metal blanks and even stringing wire! Head and jaws are made of high grade steel for years of use. Length 5-1/4" (135mm).

The Bead Holding pliers make it simple and easy to hold all sorts of beads in varying shapes and sizes. Use to sand, polish, solder or whatever else is necessary. The steel cones fit directly in the bead holes and will accommodate beads up to 23mm wide. The comfort handles make it easy on the hands and the cylindrical cones provide for a sure grip. Take advantage of this great new useful tool; a must have for the jewelry artist.

Trim and Loop in One Step

• Create & trim eye pins in one motion!
• Works with dead-soft or half-hard precious metal wire; craft wire; and copper or brass core wire
• Consistent size loops every time
• Bends & trims wire between 26-18 gauge
• Customize the length of eye pins

The #2 Plier is especially helpful to set or tighten side stones in a basket setting as well as other type mountings. One side of the plier has a slot for the wire under the stone and the other side has a beading tool cup on it. Also great for setting earrings! Simply slip the post through the slotted side and bring the beading tool down on the prong making this type of work much quicker and easier for jewelers.

If you need a larger tip you can sand it down slightly and use a small ball bur to enlarge the size. If you need to make it smaller, just sand the outside of the tip slightly.

• Perfect for setting and tightening accent diamonds surrounding color center stones.
• Great for earrings, with or without under bezel wires.
• Size of beading cup can be made smaller or larger.

The #3 Plier is invented by a stone setter, can be used by jewelers for setting virtually any size stone. The top (bent) jaw has a concave hole, which works great on prongs or pavé set stones. The straight jaw is milled so that the plier can be used on normal mountings as well as basket mountings and many more.
Made of high grade stainless steel with cushion grips, these pliers can save jewelers a great deal of time when repairing or setting stones.
Length is 140mm.

A unique design, specifically for closing prongs on tennis bracelets quickly, efficently and properly.
The angled jaw allows the user to properly bend the prong, making every setting job much easier than conventional pliers.

This is a special plier to open prongs which will not fracture stones.
The plier puts no pressure on the top of the stone, top jaw is a claw which will grips the prong cleanly and the lower jaw is grooved to hold the prong.

The top jaw is thinner to be able to get in behind the prongs, the angle and length of the bottom jaw provides precise leverage to minimize damage to stones.
the lower jaw is grooved so that it doesn't slip sideways on the prong

Specially-designed pliers for bending delicate photo-etched parts without leaving marks have a long, flat nose, tapered from base to tip to give you precise control. The tip is sharp for use in bending very small pieces. The nose measures about 4.5 cm long.