Belt/strap embossing machine:-
With this tool you can produce embossed belts and straps with crisp, deep detail up to 40mm wide. It is hand-operated and it's portable, weighing under 4kg. The cast aluminium construction will give you many years of quality use.
Embossing rolls (sold separately) are cast in durable brass/bronze.

width: 12mm

Use this "nobidome" sticker to put on the back of your stamping project. It will help prevent your leather from stretching while you stamp your work.

This thin and fiexible plastic sheet makes it easy to adjust the position and spacing of characters when stamping them into your leather. Great for personalizing your original leather work.
Font size approx 4mm

Many kinds of stamps for leathercraft ( Leather craft stamping tool ).

• Note : ALL 3D stamp is only HEAD, you need the handle to use it ( sold separately id : 13172)

• #1.4905-00
  Spring-loaded ball holds stamp in place, For 4900 series stamps and 8134.8137 Alphabet & Number Stamp Set.
  Size:7x95mm
• #2.8200-01
  Spring-Loaded ball keeps stamps attached to the handle when you lift it off your project. For 1/2in(13mm),3/4in(19mm) &1in(26mm) alphabet and number stamps and 2-D/3-D stamps.
  ize:9.4x120mm
• #3.8197-00
  Use with 1in(26mm) and 3/4in(19mm) alphabet stamps and 3-D stamps. Spreads impact over stamp for more even impressions.
  Size:25x128mm

Reusable templates are the easiest way to transfer tooling patterns to leather projects.

• High power (150 watt), suitable for hot stamp
  Also can be used for metal soldering (jointing) , using solder tip.
• Handle made from wood, has a very good insulation.

This tool is amazing! There has never been a tool that makes stamping so easy and safe for the beginner as well as the experienced.
This handy tool holds round and square stamps up to 7mm while keeping thumbs and fingers at a safe distance. Simply insert stamp in round hole and tighten by turning the knurled handle – it’s that easy! It also makes lining up the stamp easier because there is nothing to obscure the view of the stamping surface.

For stamping soft metals including aluminum, pewter, alkeme, copper, brass, and nickel silver.

Hole: Horizontal hole

Steel Letter and Number Stamping Tool Set with Impact Punch
You can stamp initials or a personal mark on wooden parts of your tools, or use the stamps to permanently and neatly mark the individual pieces of a woodworking project to aid assembly, or on a piece that is designed to be dissembled for transport.

The letters and numbers are about 6 mm high. The stamping shaft has a 6.3 mm hexagonal socket. You insert the appropriate stamp in the socket, press it to the wood, and push down on the end of the shaft against an interior spring. When the spring release point is reached, it releases an interior hammer that strikes the stamp and marks the wood. The strength of the hammer blow can be adjusted by turning a knurled section of the shaft. You hold tool in both hands, and the end of the shaft is marked with a point to show the top of the letter or number, allowing you make sure the letters come out straight and even, as in the "169" in the top stamp photo, and not the crooked "N" and "I" in the bottom photo.

In the photos you see the stamps in pine (top) and red beech (bottom). Make sure you have the proper stamp in the shaft and that it is properly aligned -- you have to get it right the first time!
Set consists of:
1 handle with automatic punch
26 upper-case letters: A - Z
9 numbers: number 6 and 9 is one stamp!
1 ampersand: &
1 point: .
Letter Size 5 mm

Alat PRESS serba guna. ( multi fungsi ).
Satu alat bisa di gunakan untuk berbagai macam fungsi pekerjaan.
Di pasang alat pricking , bisa di gunakan untuk membuat lubang jahit di kulit.
Dipasang alat pons, bisa memotong / melubangi kulit atau bahan lain.
Dipasang HOT plate, bisa untuk emboss di kulit dll

• Berat 6kg
• Size :
  
  D : 210mm
  H : 350mm
  T : 90mm
  W : 150mm