Applications: drilling of mounting a mini router
Table size : Horizontal 120 × depth 225mm
Work Scope: table depth 140mm
The maximum effective height : 160mm
Material ( body -based) : aluminum die-casting
Material ( strut ) : iron
The set includes : parallel guide · L -wrench
Drill in the picture not included.

Product Weight : 4.5 Kg
Packing size : 36.2 x 35.5 x 10.1 cm
Stand and Drill not included

Three tools in one! Enlarge, de-burr, or round out bead holes. Three different tips are included, fitting bead holes from the smallest up to 5.0mm. Each tip is coated with diamond dust for smooth, even reaming. Tips store conveniently inside the tool and attach to the top for use. Handy spring clip makes it easy to carry. Replacement tips sold separately. 4.5 inches (11.4cm).

Length :5cm, Tapered 0.7-1.8mm

Length:8cm, enlarge hole from 0.7 to 3mm

Four tools in one! Enlarge, de-burr, or round out bead holes. Four different tips are included, fitting bead holes from the smallest up to 5.0mm. Each tip is coated with diamond dust for smooth, even reaming. Tips store conveniently inside the tool and attach to the top for use. Handy spring clip makes it easy to carry. Replacement tips sold separately. 4.5 inches (11.4cm).

This is for reamer ( to enlarge ) hole, NOT to make hole

This is for reamer ( to enlarge ) hole, NOT to make hole

• Battery Operated Bead Reamer This battery operated bead reamer will easily enlarge holes in pearls, beads and gemstones. Just submerge the bead and tip into a small amount of water, holding the bead firmly. Press the button and watch the reamer work. Remember to wear goggles. Comes with two tapered tips. Requires 2 AA batteries (not included).
  Tips are .5mm
  Length of Tips: 24mm
  
• Wire Rounder Tip Now, filing the ends of wire is as simple as pressing a button! Use with the Battery Operated Bead Reamer (purchase separately) to quickly and easily round the ends of wire-wrapping wires like Silver-Filled and German Style Wires as well as Artistic Wire. The Wire Rounders can also be used with fine metal wires. Use the Wire Rounders to file handmade earwires and finish the ends of wire wrapped designs for an ultra smooth finish with no sharp edges. The smallest tip will round wires of 20 gauge and smaller; the medium tip works with 16 and 18 gauge wire; and the largest tip smooths 12 and 14 gauge wires.

• Made in China, Battery operated (2 AAA, not included)
• Ideal for engraving metal, glass, wood, ceramics, and more
• Comfortable contoured grip allows for greater control
• Includes 2 round diamond tip
• Shank diameter standard 2.35 - 2.4mm

• Set includes handle and 14 types of bits

• For use on mm size drill
  
• Size : 3, 4, 5, 6, 8, 10mm

• This is adjustable "Depth stopper" for drill
• Size 46x31mm
• Weight 23gram
• Material plastic (for lightweight reason).

Woodworking drills and ironworking drills with inner cone sizes of 3.0 mm to 7.2 mm can be installed according to the material. You can perform pilot drilling, countersunk processing, and embedded hole processing at the same time.

Code : 501
Mountable tip tool diameter:3.0mm-7.2mm

Drill Guide Set is an another handy setup, includes six precision-machined drill guide bushings and an acrylic base to hold the guides perpendicular to the work surface. It's great for a variety of common drilling needs, including knob and pull bores, doweling, specialized hardware mortises, and other situations accuracy is essential.
The base works on flat surfaces and also has V-groove in the bottom for perpendicular drilling in round cylindrical stock. Best of all, the entire kit will set you back less than twenty bucks and works with twist bits in sizes that you probably have on hand already.
The set includes:

Controller

The Dremel 200 series rotary tool offers the precision and control required to complete a wide range of projects. Its two speed settings allow you to use the low speed setting for cleaning applications and using brush accessories and the high speed setting for routing, cutting and sanding applications.