This type is made to screw to the edge of any workbench.
The screw will lock securely in place.

This type features a smoothly finished flat anvil.
Replaceable wood bench pin measures 1-3/4" wide by 4" long.
Clamp adjusts for benches up to 2" (5cm) thick.

The Simple Strike Jig is designed to help you produce perfect stamped impressions. Simply place the stamp in the jig, hold the jig firmly, and stamp. The jig holds the stamp flush, so you will always achieve an even, clear impression while saving your fingers!

This tool is amazing! There has never been a tool that makes stamping so easy and safe for the beginner as well as the experienced.
This handy tool holds round and square stamps up to 7mm while keeping thumbs and fingers at a safe distance. Simply insert stamp in round hole and tighten by turning the knurled handle – it’s that easy! It also makes lining up the stamp easier because there is nothing to obscure the view of the stamping surface.

Great for personalizing jewelry & craft components! Constructed of steel & packaged in a deluxe wooden storage box with Individually labeled slots to help keep the punches organized. Each set includes 26 A-Z letter punches, an "&" symbol, and 9 number punches (use the same punch for 6 & 9).
Use them to stamp copper, silver, brass, as well as wood, plastic, and leather & more. PLUS, our stamps include a fool-proof method to ensure your letters/ symbols are right side up every time! Simply place your thumb on the side of the punch with marked and the stamped letter will face the correct way (to stamp a 9, hold the 6/9 punch with the marked side under your forefinger).
Stamps are Gothic font, available in both Lowecase and Uppercase
PUNCTUATION:Set includes 9 punctuation punches: $ ! , ? @ . # )"

Alphabet Punch Sets size 3mm

• Includes A-Z letter punches, plus an "&" symbol
• Use to stamp metal (copper, silver, brass, clay, wood, plastic, & leather)
• Punches are marked for easy letter orientation: Simply place a thumb on the side marked to ensure the stamp is the correct way.
• Durable construction and Compact deluxe canvas storage pouch
• Individually labeled slots keep punches organized: find the punch you need quickly and easily!
• Some letter heights or individual letter styles may vary slightly

For stamping soft metals including aluminum, pewter, alkeme, copper, brass, and nickel silver.

Hole: Horizontal hole

Steel Letter and Number Stamping Tool Set with Impact Punch
You can stamp initials or a personal mark on wooden parts of your tools, or use the stamps to permanently and neatly mark the individual pieces of a woodworking project to aid assembly, or on a piece that is designed to be dissembled for transport.

The letters and numbers are about 6 mm high. The stamping shaft has a 6.3 mm hexagonal socket. You insert the appropriate stamp in the socket, press it to the wood, and push down on the end of the shaft against an interior spring. When the spring release point is reached, it releases an interior hammer that strikes the stamp and marks the wood. The strength of the hammer blow can be adjusted by turning a knurled section of the shaft. You hold tool in both hands, and the end of the shaft is marked with a point to show the top of the letter or number, allowing you make sure the letters come out straight and even, as in the "169" in the top stamp photo, and not the crooked "N" and "I" in the bottom photo.

In the photos you see the stamps in pine (top) and red beech (bottom). Make sure you have the proper stamp in the shaft and that it is properly aligned -- you have to get it right the first time!
Set consists of:
1 handle with automatic punch
26 upper-case letters: A - Z
9 numbers: number 6 and 9 is one stamp!
1 ampersand: &
1 point: .
Letter Size 5 mm

Our riveting kit, developed by instructor Gwen Youngblood, will teach you to rivet like a pro. Join metal, add no-solder bezels...the possibilities are endless! The hardest part of traditional riveting is measuring the wire prior to forming the rivet. With the three different Rivet Gauges (14, 16 and 18 gauge) included in this kit, measuring wire is easy. The Rivet Punches allow you to set rivets in difficult locations and also attach bezel cups. The Rivet Punches are 1/8", 3/16" and 1/4" to allow for a wide variety of uses. The tiny riveting block measures 1" and has twelve small divots ranging in sizes from 3 to 13.5mm. These tiny divots allow you to set round-headed rivets while maintaining the round head. A 28-page project guide with photos is also included with this kit.

From the mind of metalsmith and instructor Jay Whaley. The Rivette Sliding Hammer features a slender, hollow hammer head that holds a long punch that slides back and forth in the head. Jewelers typically use a hammer and punches to move metal, but that really isn't the "best" way to do it. There should be a better way, and this is what the Rivette does.
In bezel setting, the bezel needs to be hammer against the stone without damaging the stone. Channel setting requires moving metal to hold stones in place without breaking them. Chasing and repousse are done with repeated hammer blows. Even riveting needs careful accurate hammer blows for the right finish.
Since the punch slides within the hammer head, it is always perfectly aligned with the hammer blows. The impact the hammer blows can be easily felt by your hand so that you can quickly adjust your force.
The punch can rotate within the hammer body and the hammer head itself pivots. You can hold use the punch in whatever position is comfortable.
The hammer has a sculpted rosewood handle that is long enough to give maximum force. The punches are machined out of stainless steel for long life.
The Rivette comes with 3 punches that can be changed quickly and easily by just removing the machine screw on the hammer head. Each punch has pin that keeps it from falling out of the head.

Poundo board for leather work base.

• Compact, Fast and Flexible While small in size, the MarkinBOX 3315 (MB3315) is a big deal in part marking flexibility and functionality. Compact and lightweight, the MB3315 can be positioned at any angle with the marking head directly on any area that needs to be marked. The model is easy to use and its ergonomic design features easy-access controls and a comfortable hand strap for stability.
• Ideal for a wide range of applications, including, aerospace, automotive, electrical and semi com, marine, medical, mechanical, and oil and gas, the MB3315 can mark ten 3mm letters in as little as five seconds. A range of standard TOCHO fonts are available, as well as custom fonts and logos. Both 2D Matrix and QR codes can also be created for enhanced traceability.
• In addition to its hand-held capabilities, the MB3315 can be integrated into a production line or tool stand mount, depending on the demands of the manufacturing environment