/
Mokei : Model making (clay, diorama etc) /
Clay : Silver clay (Art clay & PMC)
You can see other clay material by brand / maker
PMC 3 Silver clay / pack
PMC 3 is great for those looking to make beautiful jewelry and work easily with silver metal clay. PMC 3 consists of 85% fine metal and 15% binder by weight. This variety of silver clay shrinks 12-15% during firing.
PMC 3 is different from PMC standard because it contains smaller metal particles. Because it has smaller metal particles, it provides you with a higher metal content and therefore less shrinkage and firing time can be as short as ten minutes.
Uses |
This form sinters more solidly than the original version and results in a stronger final product. This version can be used to craft any type of item, and it is especially recommend for rings. When fired at the highest temperature (1650F), it produces the strongest final product. It must be burnished well before soldering and uses surprisingly more solder than sheet or wire forms of sterling silver. |
Workability |
PMC3 dries more quickly than PMC Standard, so care must be taken to quickly remove and save scraps. Unused clay should be kept tightly sealed so that no air can contact it. |
Embedded Objects |
Any object that can withstand the firing temperatures and times of PMC3 can be embedded and fired in place. Some natural gemstones, lab gems and cubic zirconia's can be used, as well as dichroic glass and porcelain. Findings and some types of glass can also be embedded when fired at the lowest temperature. |
Firing Options |
|
Temperature |
Hold Time |
Kiln |
1650F 1650F 1560F 1470F 1290F 1200F 1110F |
2 hours (optimum) 10 min 10 min 10 min 10 min 20 min 45 min |
Torch |
Red Glow |
2 min |
|
*
This product can be BACK ORDERED
You can buy even though stock is not available (or not enough).
Attention : Usually it takes like 1 weeks until we can get the stock and send to you.
Ask this product
Add to my List
Booking
Notify me
Related product