Search results Login
ImageName
LC-91BSC-002A
Leather softener / 1pc
  • Water based
  • Purpose : to soften the flaps, joints, book spines and covers or any part of your leather work that will be bent often and make it more flexible and durable, while preventing cracking.
  • Also excellent as a treatment prior to carving your leather.
  • Simply add one part Leather Soft to one part water, mix and then apply evenly and as needed to your leather with a brush or high-density sponge immediately before carving. It is recommended to use a sparing amount at first and add multiple layers until the optimal amount is reached.

  • size:100cc
  • ID: 15605

    Back Order OK
    ¥
    472
    LC-91BSC-003A
    Leather Hardener and Stiffener ( Water based ) / 1pc
    • Water based
    • Purpose : leather hardener that will stiffen leather well beyond what ordinary wet moulding is capable of doing.
      Excellent for wallet pockets, gussets, and filler that may require extra stiffness, or reinforcing wet moulded leather such as masks, bags or purses, as well as strengthening leather carvings or stampings.
    • Leaves leather with a subtle and stylish antique finish.
    • Simply apply to your dry leather on the grain side with a brush or airbrush after dyeing, burnishing or moulding and leave to dry before apply other treatments. Allow to dry for three days for maximum effect. Avoid saturation as dark stains may appear on leather if soaked in solution.
    • Applying the hardener is the last step before applying lacquer, so make certain to apply all other treatments and chemicals first.

  • size:100cc
  • ID: 15602

    Back Order OK
    ¥
    567
    LC-91BSC-003C
    Leather Hardener and Stiffener ( Oil based ) High strength / 1pc
    • Oil based
    • Purpose : leather hardener that will stiffen leather well beyond what ordinary wet moulding is capable of doing.
      Excellent for wallet pockets, gussets, and filler that may require extra stiffness, or reinforcing wet moulded leather such as masks, bags or purses, as well as strengthening leather carvings or stampings.
    • Leaves leather with a subtle and stylish antique finish.
    • Simply apply to your dry leather on the grain side with a brush or airbrush after dyeing, burnishing or moulding and leave to dry before apply other treatments. Allow to dry for three days for maximum effect. Avoid saturation as dark stains may appear on leather if soaked in solution.
    • Applying the hardener is the last step before applying lacquer, so make certain to apply all other treatments and chemicals first.

  • size:100cc
  • ID: 15603

    10-14 d
    ¥
    997
    LC-92CLS-013A
    Acrylic Urethane Edge Dye & Coat for Leather / 1pc
    • Function: Edge Dye & Coat for Leather
      A penetrating edge finish that is durable and long lasting. Edge dye will dry to a semi-gloss and needs to be applied to edges that have been smoothed down. After it is applied, Edge Dye can be polished, burnished or finished with Resolene.Gives a professional finished look to the backs and edges of your leatherwork projects.
    • Apply with Wool Daubers.
    • Type : Acrylic Urethane Edge

  • size:100cc
  • ID: 15601 Options


    Back Order OK
    ¥
    680
    LC-92GUM-01D1
    CMC Tragacanth Replacement Burnishing Gum / 1pc
    • powdered CMC clear leather burnishing agent.
    • Simply mix with hot water to a ratio of 3 grams to 200ml of hot water, stir well and let sit overnight. The entire jar can create around 4.5 litres or 4.75 quarts of burnishing gum!
    • Simply apply a small amount of the resulting gum to the flesh side or edge of your leather, spread evenly then firmly work into the leather with a smooth wooden dowel or piece of scrap, reapply as necessary to leather and leave to dry.
    Note:
    Thickening properties of this CMC, make it useful for firming and coating leather for craft projects. Gum tragacanth is particularly recommended for treating vegetable-tanned leathers. you can use it to create smooth, stiff edges on leather belts. You can also use gum tragacanth to prepare leather for finishing, and as a backing for soft leathers.

    ID: 10712

    Back Order OK
    ¥
    880
    LC-94BIND-01C
    Leather finishing: Color binder /1pc

    ID: 10502 Options


    Back Order OK
    ¥
    302
    LC-95CTG-011A
    Lacquer for Varnishing Leather /1pc
    • Water based acrylic urethane
    • Excellent for ensuring the long life of your leatherwork and products, giving it a glossy protective finish.
    • Simply apply multiple coats on clean, dry, untreated leather after you have dyed and applied your lacquer primer. Once dry simply buff with a lint free cloth.

  • size:100cc
  • ID: 15604 Stock: 2
    ¥
    525
    LC-95CTG-022A
    Leather finishing: Oil emulsion wax / 1pc
    Polish finish agent.
    Put it with dry clothe and wipe with dry clothe again. Then the leather will be coated and the refined shine will appear.

  • 100cc
  • ID: 10711 Stock: 0

    Booking
    ¥
    648
    PO-CK513A3800
    Metal snap hook /1pc

  • Kan Inner diameter : 8mm
  • ID: 4574 Options
    Stock: 14
    ¥
    140
    TO-BND-L-015A
    Leather adhesive: White bond /1pc
    This water based adhesive is excellent to bond your leatherwork. It also works great on wood or paper, dries clear. Should excess glue accumulate on unwanted areas, simply burnish off when dry or semi-dry.
    Simply apply with a brush to both sides of the leather you wish to glue, then press together and hold until bonded.
    Note : #600 is "thick", suitable for inserting edge of leather into hardware. (kuchi gane)

    ID: 2258 Options


    Back Order OK
    ¥
    454
    TO-CUTL-061F1
    Leather French beveler (made in Japan) / 1pc

    ID: 10617 Options


    Back Order OK
    ¥
    2,484
    TO-HEAT-111A0
    HOT tools : Hot modeler for Leather Pyrography / 1set
    You can enjoy leather burning art easily.

    We adopt a thermal storage type pen tip that is easy to operate.
    Also, there is a guard handle so you can use it safely.
    9 kinds of soldering iron tip which is convenient for replacement are included. It takes about 2 minutes after applying electricity until it becomes usable. The maximum temperature will be reached in about 4 minutes.
    * There is no temperature adjustment function, so attach a light controller etc. Please use with care not to become high temperature.
    Please set the light controller temperature to low temperature, please use.
    Please remove it from the outlet when not using for a long time.

    ID: 2045

    Back Order OK
    ¥
    3,300
    TO-PCH-E001B0
    Leather punch : Belt - Strap end punch (English Point type ) / 1pc
    English Point Strap End Punches are hand forged with polished barrel and a tapered clearance. Used in the making of leather belts and straps.
    Made in Japan

    ID: 10737 Options


    Back Order OK
    ¥
    1,760
    TO-PCH-E001K0
    Leather punch : Corner cutter / 1pc

    ID: 20709 Options


    Back Order OK
    ¥
    2,376
    TO-SEW-1001C1
    Pro Stitching Adjustable Leather Groover Creasing Set /1set
    You can even use it for your leather carvings.

    Simply use the allen key to replace the blade with the creaser or vice-versa. By loosening the bolster you can adjust the spacer arm or remove it altogether.

    Why clutter your work space with excess tools? This versatile tool, with its adjustable and removable spacer arm and blade / creasing edge, allows you to press directly on the cutting / creasing edge giving you less slips and a more consistent groove or crease compared to standard groovers and creasers.

    Made of high quality wood and steel, this outstanding tool will give you years of use.

    ID: 485

    Back Order OK
    ¥
    2,700
    TO-SEW-1001J1
    Stitching wheel ( Stitching roulette ) - Kyoushin Elle brand / 1pc
    One handle, interchangeable spacing/overstitch wheels and a small screwdriver make this a handy addition to your tool collection.

    ID: 481 Options


    Back Order OK
    ¥
    1,690
    TO-SEW-1002D1
    Stitching hole punch - Diamond shape ( Kyoshin brand) /1pc

    ID: 10459 Options


    Back Order OK
    ¥
    540
    TO-SEW-1002F1
    Stitching hole punch - Flat shape (Kyoshin brand) /1pc
    For making hole on leather for stitching purpose

    ID: 10451 Options
    Stock: 18
    ¥
    540
    TO-SEW-1002G2
    Stitching hole punch ( Europe style ) (Kyoushin brand) NEW /1pc

    ID: 10358 Options


    Back Order OK
    ¥
    1,400