Scribing tool with adjustable grip for standard pencils
Easily maintain consistent scribe offset, keeping parallel to surface
every time
Durable polymer construction
Includes 1 scribe; pencil not included
5-3/4 inches long

• Industrial grade, very hard and sharp points. can be used to scribe circles, mark divisions (divide a given distance), or simply mark a distance.

Japanese Ink Lines (Sumitsubo)
The Sumitsubo is one of the most important marking tools used by the master Japanese carpenter. Similar in function to the Western chalk line, it is used to mark thin, straight lines on wood and other materials. A fine silk line is drawn out through an ink soaked wad of cotton, tensioned and then snapped against the workpiece. This allows you to mark very long (up to 10 m), fine and exceptionally accurate lines. Can also serve as a plumb line.

• With a sealed ink reservoir to prevent ink from leaking out or drying up.
• Automatic spring-loaded recoil with locking mechanism.
• Unbreakable plastic body and thread bob

Steel Letter and Number Stamping Tool Set with Impact Punch
You can stamp initials or a personal mark on wooden parts of your tools, or use the stamps to permanently and neatly mark the individual pieces of a woodworking project to aid assembly, or on a piece that is designed to be dissembled for transport.

The letters and numbers are about 6 mm high. The stamping shaft has a 6.3 mm hexagonal socket. You insert the appropriate stamp in the socket, press it to the wood, and push down on the end of the shaft against an interior spring. When the spring release point is reached, it releases an interior hammer that strikes the stamp and marks the wood. The strength of the hammer blow can be adjusted by turning a knurled section of the shaft. You hold tool in both hands, and the end of the shaft is marked with a point to show the top of the letter or number, allowing you make sure the letters come out straight and even, as in the "169" in the top stamp photo, and not the crooked "N" and "I" in the bottom photo.

In the photos you see the stamps in pine (top) and red beech (bottom). Make sure you have the proper stamp in the shaft and that it is properly aligned -- you have to get it right the first time!
Set consists of:
1 handle with automatic punch
26 upper-case letters: A - Z
9 numbers: number 6 and 9 is one stamp!
1 ampersand: &
1 point: .
Letter Size 5 mm

Different kinds of molds for clay and or Resin
Made by Floree and Nisshin Associate Japan or other similar manufacturer

This is high quality resin mold to make japanese doll / anime.
We sell the mold to make the face only. Pictures above are result samples.

this is matt surface for clay working.

A carpenter's square is frequently needed just because of its size. The key
disadvantage of such a square (its lack of a supporting fence ledge) can now
be eliminated using a Veritas square fence.
The 8" long anodized aluminum extrusion can be readily attached to either
the stock or blade of your square (depending upon intended use) with the two
integral brass screws. The face of the square fence aligns with the edge of
the workpiece while the weight of the framing square rests on the material.
One side offers a 1" high face. Flipping it over, the opposite side has a 1/4
face, letting you use it on workpieces this thin without having to slide them
to the edge of your workbench.
Ideal for use on round-edge material and sheet stock.
Made in Canada.

Safety cutting guide are combination ruler and straight edge. The curved aluminum guard prevents you from accidentally cutting your fingers.
Ideal for Industry, Craft, also suitable for housewife to cut fabric for quilting, patchwork, etc
The Safety cutting ruler has a solid aluminum alloy body with an extra thick cutting face

Change units quickly and easily by rotating dial at either end of scale—no need to move the scale from the work surface.

Made from clear high impact acrylic.
Convenient for measuring on 2x4 stocks

Make layout easier scribe perfect 45 and 90 cutlines at the same time! Ideal for picture frames, corner molding, and various box constructions, this precise gauge also works to prep saw blades or drill presses for angled jobs.
A balanced, wide-face design adds remarkable stability, while interior windows make marking parallel lines fast and easy. Made from polycarbonate.
Additional features:

Japanese marking gauges (Kebiki) use blades, not points, to mark the workpiece, and have a relatively wide stock. The blades used have the advantage of leaving a clean cut when marking across the grain. Blades cut the fibers, while points just tear them up. Like other Japanese woodworking tools, these gauges are always pulled along the workpiece.

The Kebiki’s blade has a single bevel on the inside of the blade toward the stock, the angled edge dictates the pull stroke.
With the Kama-Keshiki (mortise marking gauges) with two knives, the bevels face each other. Suji-Keshiki with two stems, the bevels on the knives are parallel and not facing each other. Sometimes when delivered, the knives do not protrude from the stem enough to cut properly. One should never try to drive the knife farther out with heavy hammer blows! This could easily split the wooden stem! One should instead enlarge the hole with a needle file or a sharp knife. The marking knife should stick out about 1 - 5 mm -- it depends on the feel of the tool you prefer. But more will cause problems as the stock then cannot be consistently held square to the workpiece. Then push the knife back into the stem and tighten it up with very light hammer blows! The measuring scale on the stem should be used only as a rough guide. One must use a precise ruler or other measuring method to exactly set the distance between the knife and the stock if precision is needed. For fine adjustments on Keshiki where the stem is wedged in place, one can use light taps with the flat of a hammer on the appropriate end of the stem to adjust the setting. The wedge can be set by pressing forcefully with your thumb, or with light hammer taps if needed.

Copy and measure any irregular shape by pressing gauge against the contour to be copied. When removed, a perfect pattern has been produced for cutting, matching or checking dimensions. Ideal for fitting floor tiles and carpet around molding and pipes. Also used for checking wood parts against drawings.

High quality protractor for hobby use.
Easy to use and precise, great for many hobbyist.
size : 90 mm x 1.25 mm and
: 196mm x 1.25 mm

Feature :
Digital display for numerical value
Hold function so you never forget a measurement
Measurement range
Angle : 0.0 ° ~ 359.9 °
Length : 0 ~ 395mm
Accuracy
Angle : ± 0.3 °
Length : 200mm ± 0.2mm or less
( Two of the range that does not cross a straight length portion)
Minimum scale
Angle : 0.1 °
Length : 1mm

Power : one lithium battery CR2032 ×

Auto power off : about 5 minutes in a non-operation state

Battery life : about 2,000 hours