The original wire bending jig. This is a very handy wire bender used for bending steel and soft wires up to 8mm. It includes pins for bending. You can create your own wire creations, S-hooks, card holders, picture easles, hangers etc. I love this jig especially as I like working with thicker wires. I have even made hanging basket frames with metal rod used for suspended ceilings !

**The color may vary.**

BEADALON-Coiling Gizmo. Easily coil your wire using this Coiling Gizmo!
This package includes 1 U-Bracket; 2 crank rods; 1 screw an instructions.

BEADALON-Coiling Gizmo Deluxe Econo Winder. Easily coil your wire using this Coiling Gizmo Deluxe!
This package includes 1 U-Bracket with built-in mount; 5 crank rods (1mm,1.6mm,3.1mm,4mm,4.7mm) and instructions.

Professional Deluxe Coiling Gizmo
Include 5 Rods: 1mm, 2.5mm, 3mm, 5mm, 7mm x 38cm.
The Professional Deluxe Coiling Gizmo comes with a C-Clamp mounted chuck, five 15in (38.1cm) rods, an additional U Clamp Bracket, and a swivel attachment.
To use, mount the tool to a table or workbench, insert a rod into the chuck and tighten, and thread the end through the other bracket.
Use it by cranking wire around the rod of the Professional Deluxe Coiling Gizmo to make coils and to create beads and bracelets.
The swivel attachment allows you to coil directly onto wire. Try stringing beads onto the wire with the Spin-N-Bead for another design option.

These Spiral Makers create perfect spirals out of Artistic Wire, German Style Wire and any other soft wire 20 ga (0.81 mm) and smaller. Use colorful spirals to embellish jewelry, scrapbooks and paper crafts. Use small pieces of the diameter wire you intend to make the spiral as a washer on the three screws. Tighten wing nuts and insert the same gauge wire into the device. Center the wire in the center hole and insert the twister handle so the wire is inside the slit on the handle. Twist the handle until the desired size of coil is reached. Tip: count the number of turns to re-create the same size coils for multiple coils, or perfectly matching earring dangles.

Use this Crinkle tool, to crinkle wire 20 Gauge (0.81 mm)
Attach like gears onto the base, insert wire into the small hole on guide then catch into the center of the gears. Slowly turn gear with handle until wire is moving through the gears, continue to turn while pushing down on both gears until desired amount of crinkled wire is made.
Make perfect spirals every time
Package has instructions and contains two styles of gears (rounded & pointed) and base.