/ Mokei : Model making (clay, diorama etc) / Clay : Non drying, Wax/Oil based clays

This is OIL Based clay, which means it WILL NEVER dry
Usually used for prototype making, or mold making.
Sort by
...
CC-ND01-001A1
Mr.Clay 2 ( Oil based clay for mold making ) / 1pc

Moderate hardness and stickiness, and excellent workability.
Good for making prototype etc.
  • Size: 500 gram
    • ⯅ ID: 12725 Stock: 0
    Back Order OK
    ¥ 303
    CC-ND01-002A1
    Oil based clay : Hoiku / 1pc

    In Japan this clay has been used widely from children education to art class professional, as well as sculpture purpose. This is Oil based clay with medium hard characteristic, which is suitable for making fine detail prototype.
    Good compatibility with silicon, suitable for making rubber mold.
  • Size: 500gram
    • ⯅ ID: 12714 Stock: 3
    Back Order OK
    ¥ 400
    CC-ND01-003P0
    Oil based clay : Leon Clay ( Free Sulfur ) / 1pc

    A sulfur-free oil soil made from oil and natural soil that are free from pollution. It has a good release of gypsum and has a hardness that can withstand the heat radiation when the gypsum is set. It is very economical because it can be used repeatedly. Because it is a natural color, the color may be slightly different, but the quality does not change.
    ⯅ ID: 12713 Options
    		 Stock: 33
    Back Order OK
    ¥ 1,690
    CC-ND01-003R1
    ROMA Plastilina / 1pc

    • Roma Plastilina is considered by many to be the world’s finest modeling material.
    • It is permanently pliable.
    • Contains Sulfur

    How to use

    1. Temporarily soften your plastalina modeling clay by increasing the temperature of the clay.
      Turn on a hair dryer to a low setting and hold it 3 to 5 inches from the surface of the clay.
      Run the dryer over the clay's surface in a constant motion to gently heat the clay.

    2. Knead the clay vigorously to spread the heat throughout the clay evenly.
      The process of applying the heat and the motion of kneading the clay will soften it for working. Once the clay cools, it will return to its previous level of firmness.

      No Hardness Purpose
      1 Soft For those who prefer an extremely plastic modeling plastilina, best for large work
      2 Medium A slightly firmer consistency, generally used for all average work
      3 Medium firm A more consistent degree of firmness, generally used for smaller models and by those who prefer a firmer modeling plastilina
      4 Very hard Very hard, for small figures , medallions, reliefs and other high detail work.

    3. Size: 920 gram
    ⯅ ID: 12721 Options
    		 Stock: 0
    Booking
    ¥ 3,960
    CC-ND01-004A1
    Chavant NSP ( Non Sulfurated Plasteline ) / 1pc

    NSP is a line of prefessional, sulfur -free sculpting clays, replacing sulfur minimizes difficulties associated with mold making using silicone rubber. Can be melted and poured at approx 185 F, available in soft, medium and hard
  • Size: 906 gram
    • ⯅ ID: 16623 Options
    		 Stock: 0
    Booking
    ¥ 1,728
    CC-ND01-005A1
    Fantasy Wax ( Non sulfur Modelling wax )
  • Weight : 100 gram
    • ⯅ ID: 16624 Stock: 12
    ¥ 1,000