- Knead the two parts (white and purple) compound until the color is uniform.
- Press the pattern into th compound, then allow mold to cure (about 10-15min) After Your curing time your mold is ready.
- Press your unfired metal clay (or not yet oven polymer clay) onto to the mold
- Remove your clay carefully and fire it using oven
/ Mokei : Model making (clay, diorama etc) / Modelling : Mold making & Casting material
Silicon mold maker : Cold mold (USA) / 1set
Now you can make a rubber mold for wax injection or clay making, without heat and without mixing and pouring liquids. This 0% shrinkage silicone rubber is a 2-part putty that you simply knead together and then press into a standard mold frame to cure under pressure, without heat for 15-30 minutes. Packaged in two containers, part A (white) and part B (purple) of total 30grams
- Working Time: 2 min. (approx)
- Cure Time: 15 - 30 min. (approx)
- Shrinkage: 0%
- Tensile Strength: 400 psi
- Tear Strength: 55 ppi
- Elongation: 375%
Keyword :
mold_making |
Notify me