The backing plate can be replaced with a commercially available 3mm square bar!
The backing plate acts like a “chopping board” that catches the cutter blade and can be damaged while the product is in use.
As the backing plate of this product uses a commercially available plastic 3mm square bar, if the backing plate is damaged, it can be replaced with a new commercially available 3mm square bar.
This product does not include a replacement backing plate. When replacing, purchase a 3mm square bar separately from a model store, etc., and cut it to 82mm length to use as a new backing plate.
Measure the width with a dedicated scale and cut!
By attaching a special scale to the amazing cutter, it is possible to measure and cut out the width from 2mm to 31mm.
* Since there may be a manufacturing error, use the scale as a guide.
Safe storage with metal hooks!
Amazing cutters are extremely dangerous if the blade is open when not in use, so a hook is provided to keep it closed when not in use. In consideration of safety, the hook is made of durable metal.
When using the Amazing Cutter, you can fold it by pushing the hook into the grip, so it won't interfere with your work.
Product contents
· Amazing cutter body ... 1
· Cutter blade (special black blade (small)) ? ? ? 1 [Installed]
· Receiver plate (3mm plastic square bar) ... 1 [Installed]
· 2mm hexagon wrench ... 1
-Scale body ... 1 piece
· M3 × 8 hexagon screw ? ? ? 1 piece
· 0.5mm thickness washer (black) ... 1
· 0.2mm thickness washer (transparent) ... 1
Target cutting object (when using OLFA special black blade (small))
· Plastic board, paper, cloth, vinyl, cardboard, etc. with a thickness of 2mm or less and a length of 75mm or less.
(Transparent plastic plates with a thickness of 0.5 mm or less can also be cut)
[! ] Notes
· Water-resistant paper can be cut, but the blade hurts immediately. In that case, replace the blade.
· Be careful when cutting with the tip of the blade, or cutting things that do not fit on the blade, as the blade will easily break.
· The blade edge is very dangerous. Never touch the blade edge.
· There may be unevenness in the black dyeing of the metal part of the body, but there is no performance problem.
/ Hand Tools for craft and hobby / Cutting tools : Cutter & Cutting mat
/ Mokei : Model making (clay, diorama etc) / Diorama ( model making )
The plastic plate can be cut quickly with light force!
By simply holding the grip with the object you want to cut, you can cut the object straight and crisp.
Designed to cut a plastic plate with a thickness of 2mm or less and a length of 75mm or less. In addition to a plastic plate, paper, cloth, vinyl, cardboard, etc. can be used if it is 2mm or less and the length is 75mm or less Cut.
If your production is small and you want to cut it straight, you can use the Amazing Cutter to make it crisp.
The cross section is clean! Amazing sharpness!
The cut surface is almost not crushed and can be cut straight and clean. For this reason, the labor of shaping after cutting can be greatly reduced.
If it is a rod-like object, it can be cut to a thickness of 5 mm!
By using the notch, you can cut round (or 5mm square) rod-shaped material with a diameter of 5mm.
The blade can be replaced with a commercially available cutter blade!
Since the blade uses a commercially available cutter blade, it can be replaced with a new commercially available cutter blade if the sharpness deteriorates.
Replacement blades are not included with this product. Purchase a replacement cutter blade from your local dealer.
Replacement cutter blades are also available on the official online hand site of God Hand.
* “Special black blade (small)” is recommended for cutting plastic plates.
OLFA Olfa cutter blade (small)
Model number: SB10K, SB10KS, SB10B, SB10BS, SB50K
OLFA Stainless Spare Blade (Small)
Model number: SSB5B, SSB5K
OLFA Special Black Blade (Small)
Model number: BB10K, BB10KS, BB50K
*
/ Mokei : Model making (clay, diorama etc) / Diorama ( model making )
God Hand Amazing Cutter /1pc
The plastic plate can be cut quickly with light force!
By simply holding the grip with the object you want to cut, you can cut the object straight and crisp.
Designed to cut a plastic plate with a thickness of 2mm or less and a length of 75mm or less. In addition to a plastic plate, paper, cloth, vinyl, cardboard, etc. can be used if it is 2mm or less and the length is 75mm or less Cut.
If your production is small and you want to cut it straight, you can use the Amazing Cutter to make it crisp.
The cross section is clean! Amazing sharpness!
The cut surface is almost not crushed and can be cut straight and clean. For this reason, the labor of shaping after cutting can be greatly reduced.
If it is a rod-like object, it can be cut to a thickness of 5 mm!
By using the notch, you can cut round (or 5mm square) rod-shaped material with a diameter of 5mm.
The blade can be replaced with a commercially available cutter blade!
Since the blade uses a commercially available cutter blade, it can be replaced with a new commercially available cutter blade if the sharpness deteriorates.
Replacement blades are not included with this product. Purchase a replacement cutter blade from your local dealer.
Replacement cutter blades are also available on the official online hand site of God Hand.
* “Special black blade (small)” is recommended for cutting plastic plates.
OLFA Olfa cutter blade (small)
Model number: SB10K, SB10KS, SB10B, SB10BS, SB50K
OLFA Stainless Spare Blade (Small)
Model number: SSB5B, SSB5K
OLFA Special Black Blade (Small)
Model number: BB10K, BB10KS, BB50K
*
This product can be BACK ORDERED
You can buy even though stock is not available (or not enough).
Attention : Usually it takes like 1 weeks until we can get the stock and send to you.
You can buy even though stock is not available (or not enough).
Attention : Usually it takes like 1 weeks until we can get the stock and send to you.