The backing plate can be replaced with a commercially available 3mm square bar!
The backing plate acts like a “chopping board” that catches the cutter blade and can be damaged while the product is in use.
As the backing plate of this product uses a commercially available plastic 3mm square bar, if the backing plate is damaged, it can be replaced with a new commercially available 3mm square bar.
This product does not include a replacement backing plate. When replacing, purchase a 3mm square bar separately from a model store, etc., and cut it to 82mm length to use as a new backing plate.
Measure the width with a dedicated scale and cut!
By attaching a special scale to the amazing cutter, it is possible to measure and cut out the width from 2mm to 31mm.
* Since there may be a manufacturing error, use the scale as a guide.
Safe storage with metal hooks!
Amazing cutters are extremely dangerous if the blade is open when not in use, so a hook is provided to keep it closed when not in use. In consideration of safety, the hook is made of durable metal.
When using the Amazing Cutter, you can fold it by pushing the hook into the grip, so it won't interfere with your work.
Product contents
· Amazing cutter body ... 1
· Cutter blade (special black blade (small)) ? ? ? 1 [Installed]
· Receiver plate (3mm plastic square bar) ... 1 [Installed]
· 2mm hexagon wrench ... 1
-Scale body ... 1 piece
· M3 × 8 hexagon screw ? ? ? 1 piece
· 0.5mm thickness washer (black) ... 1
· 0.2mm thickness washer (transparent) ... 1
Target cutting object (when using OLFA special black blade (small))
· Plastic board, paper, cloth, vinyl, cardboard, etc. with a thickness of 2mm or less and a length of 75mm or less.
(Transparent plastic plates with a thickness of 0.5 mm or less can also be cut)
[! ] Notes
· Water-resistant paper can be cut, but the blade hurts immediately. In that case, replace the blade.
· Be careful when cutting with the tip of the blade, or cutting things that do not fit on the blade, as the blade will easily break.
· The blade edge is very dangerous. Never touch the blade edge.
· There may be unevenness in the black dyeing of the metal part of the body, but there is no performance problem.